User manual

Digital Video Recorder User Manual

5.9 Configuring HDD Group

Purpose:

You can group the HDDs and save the record files in certain HDD group.

Steps:

1. Enter HDD setting interface.

Menu>HDD>Advanced

2. Select Storage Mode tab.

Check whether the storage mode of the HDD is Group. If not, set it to Group. For detailed information,

please refer to Chapter 12.3 Managing HDD Group.

3. Select General in the left bar.

Click to enter editing interface.

4. Configuring HDD group.

1) Choose a group number for the HDD group.

2) Click Apply to save your settings.

3) Click OK to back to the upper level menu.

5. Repeat the above steps to configure more HDD groups.

6. Choose the Channels which you want to save the record files in the HDD group.

1) Enter Storage Mode interface.

Menu>HDD>Advanced> Storage Mode

Figure 5. 28 HDD Advanced

2) Choose Group number in the dropdown list of Record on HDD Group

3) Check the channels you want to save in this group.

4) Click Apply to save settings.

After you have configured the HDD groups, you can configure the Recording settings following the procedure

provided in Chapter 5.2-5.7.