User manual

Network Dome Camera·Quick Start Guide
39
39
Note:
For certain camera models, the auxiliary video cable is not included
in the package. Instead, you can connect the video out interface of
the camera to a monitor for image and focus adjustment.
Video Out
Interface
Video Out Interface of the Camera
2.3.1 3-Axis Adjustment
Steps:
1. View the camera image using the monitor.
2. Rotate the panning table to adjust the panning position of the
camera.
3. Rotate the tilting axes to adjust the tilting position of the camera.
Note:
The tilting angle varies according to the different models as the
figures below. Please refer to the actual device.
4. Rotate the lens table to adjust the azimuth angle of the image.