User manual

Network Bullet Camera·Quick Start Guide

Drilling Holes in the Wall

3. If you need to route cables through the wall (or the ceiling), cut a

cable hole according to the drill template. Skip this step, if you

want to route the cables on the surface of the wall (or the ceiling).

4. Route the cables of the camera.

5. Secure the camera to the wall (or the ceiling) with expansion

screws.

Drill Template

Secure the Camera

6. Adjust the view angle.

3-axis (pan/tilt/rotation) adjusting allows adjustment for optimum

camera rotation and placement. Follow the steps below to adjust

the view angle.

Pan Adjustment

Steps:

1). Loosen the lock screw 1.

2). Adjust the panning position of the camera. The adjusting range

is from 0° to 360°.