User manual

Network Bullet Camera·Quick Start Guide
29
29
Steps:
1. Remove the sun shield and front cover to expose the zoom lever
and the focus lever.
2. View the camera image on the monitoring screen.
3. Loosen the zoom lever and move the lever between T (Tele) and
W (Wide) to obtain the desired angle of view.
4. Tighten the zoom lever.
5. Loosen the focus lever and move the lever between F (Far) and N
(Near) to obtain the optimum focus.
6. Tighten the focus lever.
7. Install the sun shield and the front cover back to the camera.
Zoom/Focus Lever
Zoom and Focus Adjustment
If the camera is equipped with a fixed lens, you don’t need to adjust
the zoom and focus.