User manual

EN - Quick Guide
3
Figure 1-3 Activation via Web Browser
Step 6: Re-wiring for network camera access.
1) Connect the network camera and your PC to the same router or the same switch.
网络交换机
Network Cable
Network Cable
or
Network Camera Computer
2) Connect the power cable.
Step 7: Access the network camera and modify its IP address.
1) Power on the network camera.
2) Visit the network camera by its default IP address: 192.168.1.64.
3) Input user name and password you set during activation to log in the network camera.
4) Modify the IP address to the same subnet with the connected router or switch.
5) Re-login with the new IP address.
Step 8: Perform operations with the network camera.
You can perform such as live view, PTZ, recording, detection setting, etc.
Note:
The functions vary depending on the models of network camera.
TECHNICAL SUPPORT
In case of any problem, please immediately contact the local after-sales service authorized by
HiWatch.