User manual

Network Bullet Camera·Quick Start Guide
12
12
Figure 2-2 Install the Camera
3. Adjust the view angle.
1). Loosen No.1 lock screw to adjust the tilt angle [~100°].
2). Loosen No.2 lock screw to adjust the pan angle [0°~360°].
3). Loosen No.3 lock screw to rotate the camera [0°~360°].
4). Tighten the lock screws.
1
2
3
~
360°
~
100°
~
360°
Figure 2-3 Adjust the View Angle