User manual

Network Bullet Camera·Quick Start Guide
15
15
Wall Mounting with a Gang Box
Note:
An adapter plate should be purchased separately if you mount the
camera to a gang box.
Steps:
1. Install the adapter plate to the gang box.
2. Route the cables.
3. Fix the camera to the adapter plate with screws.
4. Adjust the view angle. For details, refer to Step 3 in Chapter 2.1.
5. (Optional) Install the water-proof jacket for network interface. For
details, refer to Step 4 in Chapter 2. 1.
Adapter Plate
Figure 2-6 Installation with a Gang Box