User manual

Network Speed Dome·Quick Start Guide
4
Scews
Micro SD Slot
Figure 1-6 Micro SD Card Slot (Mini IR Speed Dome Type II)
1.2.3 Speed Dome Installation
IR Speed Dome Installation
Steps:
1. Hang the safety rope to the speed dome and then hook to the bracket as shown in Figure 1-7.
Figure 1-7 Mount the Dome
2. Route the cables of the speed dome through the bracket.
3. Connect the corresponding network/power cables.
4. Loosen the two lock screws on the bracket with the Allen wrench.
5. Install the speed dome to the bracket, and secure the speed dome by rotating the speed dome
clockwise.
6. Fasten the two lock screws with the Allen wrench.