User manual

Network Speed Dome·Quick Start Guide
10
Figure 2-3 SADP Interface
3. Create a password and input the password in the password field, and confirm the password.
STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong
password of your own choosing (using a minimum of 8 characters, including at least
three of the following categories: upper case letters, lower case letters, numbers, and
special characters) in order to increase the security of your product.
4. Click OK to save the password.
You can check whether the activation is completed on the popup window. If activation failed,
please make sure that the password meets the requirement and then try again.
2.3 Modifying the IP Address
Purpose:
To view and configure the speed dome via LAN (Local Area Network), you need to connect the
network speed dome in the same subnet with your PC. Then, install the SADP software or client
software to search and change the IP of network speed dome. We will take modifying the IP
Address via SADP software as an example to introduce the IP address modification.
Steps:
1. Run the SADP software.
2. Click to select an active device.
Please refer to the section 2.2 Activating the Speed Dome to activate the speed dome if it
is inactive.
3. Change the device IP address to the same subnet with your computer by either modifying the
IP address manually or checking the checkbox of Enable DHCP.