User manual

Network Speed Dome·Quick Start Guide
1
1 Installation
Warning: Do not power the speed dome up until the installation is finished. To ensure the safety of
personnel and equipment, all the installation steps should be done with power supply off.
Before you start:
Check the package contents and make sure that the device in the package is in good condition and
all the assembly parts are included.
When carrying the speed dome, do not directly pull waterproof group cables. Otherwise,
the waterproof or circuit performance may be affected.
1.1 Connecting Cables
The cable interfaces of network speed dome are shown in two following figures. The cables are
distinguished by different colors. Please refer to the labels attached on the cables for identification.
The cables may vary according to the models.
The cables of the speed domes:
POWER INPUT
AUDIO-IN and OUT
ALARM-IN and OUT
Network
Video Output
VIDEO
RS485
Figure 1-1 Cables of Network Speed Dome