User manual

HD-TVI Speed Dome·Quick Start Guide

1.2 DIP Switch Settings

1.2.1 Mini Speed Dome Settings

 DIP Switch Location of Mini Analog Speed Dome

DIP Switch

Figure 1-2 DIP Switch of Mini Analog Speed Dome

 Setting DIP Switch

1 75 6432 8 9 10

ON DIP

1 2

Figure 1-3 Enlarged View of DIP Switch

Table 1-2 Switch Functions

Switch No.

Function

1 to 5 (SW1)

Set the address for the speed dome

6, 7 (SW1)

Set the baudrate for the speed dome

8, 9 (SW1)

Set the protocol for the speed dome

10 (SW1)

Set the TVI mode for the speed dome

1,2 (SW2)

Set the terminal resistor for the speed dome

The DIP switch is designed according to binary system. When the switch is ON, it stands for the

number 1. When the switch is OFF, it stands for the number 0.

Example:

The SW1 switches from No. 1 to 5 are used to set the speed dome address. No. 1 is the lowest digit

and No. 5 is the highest. Turning on all these 5 switches stands for the binary number 11111.

Converting the 11111 to a decimal number is 31. So the speed dome address will be 31.

 Address List