Product Info

Smart Cabinet Lock version1.0
D2-2F, MOJU INDUSTRIAL PARK, #199, XIQU AVENUE, HI-TECH ZONE WEST, CHENGDU, SICHUAN, CHINA.
19
/
25
Exploded Diagram
Installation steps
1
At the position that required to use heighten frame20on the cabinet door,
punch6 Ф6mm round holes at the six bumps position that contacted with
the cabinet door. Hole size please refer to"higher installation punch holes
and size" section, or use the the punch location paper template25 andrefer
to" 4.3. Use the punch location paper template"section.
2
Insert the lock body1,lock body rubber pad4, heighten frame20, Heighten
frame rubber pad21 into the cabinet door50 from outside.
3
Use Short fixing clamp plate A 22, Short fixing clamp plate B 23, to install on
the lock body1, and tighten them with M5X16 Countersunk head cross
screw and M5X20 Cross screw with pan head.
4
Install the shaft washer5, Heighten washer A 6, Heighten washer B 12 on the
lock body1 shaft in turn. Height adjustment please refer to “4.2. Adjustment
for steel bolt”.
5
Then install steel bolt7, flat pad8, φ5 Spring washer10 in turn, and tighten
them with cross hexagon combined screw9.Left and right opening
adjustment please refer to" 4.1. Adjustment for left opening door or right
opening door" section.
6
Installation finished. Check whether whether the installation is missing or
wrong.
*** If the steel bolt7 provided by this product cannot meet the requirement of size during
installation, the original steel bolt of the cabinet can be used.
Effect after installation