Product Info

Smart Cabinet Lock version1.0
D2-2F, MOJU INDUSTRIAL PARK, #199, XIQU AVENUE, HI-TECH ZONE WEST, CHENGDU, SICHUAN, CHINA.
23
/
25
5.3. Unlock via smart key
1、Insert the key6 into the key hole3 of the dust cover5, press it down, move the
dust cover5 down, and insert the key6 into the key hole3 completely.
2、According to different ways of unlocking, after the key lamp flickers (buzzer
sounds), press the handle and hold for about 1 second.
3、Release the handle4, the handle4 pop-upautomatically, wait about 2 seconds
(Please pay attention that you can't take off the key6 during this period,
otherwise you may have a situation where the handle4 can't be closed. If it
happens, press down the handle4 to remain closed, and then re-do a full
unlocking operation to remove this abnormal state), and then press the key
button to remove the key6, and dust cover5 automatically back. After that turn
the handle4 to open the door.
4、When user’s jobs finished, press down the handle4 and the lock will be
locked automatically.
5.4. Unlocking via Bluetooth
1、Gently press the handle4 then release to activate the power of the cabinet
lock, the indicator light2 turns on.
2、Connect APP with the lock (use APP to search the lock and connect), then the
indicator light2 flashes. If the user does not use APP to connect with the lock for
more than 30 seconds, the lock will automatically power off.
3、The buzzer emits a short sound after APP sends an unlocking signal to the
lock. If the handle4 is not in reset mode, the unlocking signal is invalid;
4、Press the handle4 for about 1 second and release, the handle4 will
automatically pops up. If this action is not done within 10 seconds, the lock will
automatically lock up and power off.
5、When user’s jobs finished, close the door and press down the handle4 and
the lock will be locked up automatically, and the buzzer will ring for a short time
then the lock power off. When the lock power is in battery mode, the power will be
turned off immediately after the lock is unlocked, and there will be no buzzer prompt.
5.5. Restart
In the case of lock crashing, use metal wire or metal things to short- circuit the two restart
electrodes and then remove, and the restarting is completed.
6. Dos and don'ts
1、Please do notexceed the limits specified in this specification when use the lock.