Data Sheet

keyless padlock Data Sheet
11 | 13
4
Organize the keyboard cable, and then push the keyboard into the lock shell in parallel.
During the push process, notice that the black waterproof ring should always be placed in
the keyboard slot.
5
Check locking and unlocking is normal or not.
6
After normal, install the screws back into place and tighten.
7
Check again locking and unlocking is normal or not .
4.3 Self-priming magnetic external emergency power supply
design
An external emergency power supply interface is configured on the lock. When the
battery is exhausted, the lock cannot be unlocked. The power supply can be unlocked
(the lock permission is still required), and then the battery is replaced.
This interface uses a self-priming magnetic socket and the outside is flat. It does not
need to be deliberately aligned during operation. The self-priming magnetic design
automatically adjusts the power plug and socket to the optimal position.
The self-priming magnetic power supply line does not have a short-circuit
protection structure. When operating, the emergency power supply line must be
connected to the lock first, and then the USB A interface of the emergency power
supply line is connected to the external power supply (the power supply is DC 5V);
The external power supply must be disconnected immediately, and then the lock end
should be disconnected. Even during operation, the magnetic power supply wire
should be prevented from falling off and attached to other metal objects, otherwise
the external power supply may be damaged or other safety accidents may occur.
4.4 Restart
In the case of a lock-up machine, the reset electrode and the metal part of the outer
ring of the emergency power supply socket are short-circuited by a metal wire and
then removed, and the reset is completed.
4.5 Lanyard
After unlocking, in order to prevent the lock from being moved to other places or
falling off the ground, the lanyard hook can be tied with other items such as the
fence door with a lanyard, and of course it can be omitted.