Function Thank you for choosing this camera. Please carefully read the manual before using, and keep it at a safe place for future reference. The compilation of the manual refers to the latest information. The manual quotes captured screen displays and graphics, with the aim to introduce the digital camera through detailed and direct methods.
Removing the battery from the camera Start to use 1. Charge the built-in lithium battery The camera is equipped with built-in 3.7V lithium battery. Please ensure power available for the camera and timely charge it in case of low battery.
Connect the camera to computer for charging. Camera must be “Power off”. The charging indicator will be on when charging, and will be off when the battery is fully charged. Generally, the battery can be fully charged after about 4 hours. Note: when the DV is on, it will not charge until the DV turn off. 2. How to use the memory card 2.1.Properly insert the MicroSD card into the card holder as per the instructions indicated near the card holder. 2.2.
3. Function modes switching The camera has 4 modes: recording mode, photo mode, movement mode and playback mode. Press the Mode key to switch the modes after starting up. • Recording mode: video can be recorded; • Photo mode: for taking photos; • Movement mode: Special for videos in movement; • Playback mode: for playing back the current video/photo from the SD Card. 4. Indicators 5.1 BUSY indicator: when the camera is working (e.g. recording, photographing, etc.), the indicator will light; 5.
6.3 Screen display in movement mode 1. 2. 3. 4. 5. 6. 7. movement mode resolution and fps. Storage available. Micro SD card. WIFI. Battery. Date and time. 7.Playback mode Turn on the camera, you can press the mode key to enter playback mode. You can press the up/down key to choose the photo or video you want to play, then press the shutter key to enter preview. Press mode key to enter playback mode to browse photo/video, play the video recorded by this camera.
Recording and photo menu: 8.2 System Configuration menu After opening the menu by pressing power key, press mode key to switch over to setting main menu. Press up/down key to select menu, and after that to press shutter key for confirming to enter the submenu. In the submenu, press up or down key to select menu, and press shutter to confirm. After returning to the main menu, go to the “X” icon to return to main menu. System menu mode: 8.
completion of adjustment or press power key to cancel setting and exit. Finally, press power key to exit from setting mode 8.4 Time-lapse mode settings To configure the camera into time-lapse mode, enter in setting menu and then select photo settings. Enter in time-lapse submenu and adjust the shutting time for each photo. Keep in mind that in PAL-DV mode, to get 1 second in video you will need take 24 photos; and in HD mode 30 photos.
When the camera is connected with the HDTV successfully, the camera display is synchronizing with HDTV display. Note: before connecting or removing the HDMI cable, please stop video recording and disconnect WI-FI first. 10. Connect to PC 10.1 When the camera is connected with the computer and entering removable disk mode, there will be a removable disk added in the window of “my computer”. The photo or video file may be stored in the catalogue of “DCIM\CAR, JPG, VIDEO” in the removable disk.
11.2. Android APP 1. Install “XDV”APP (provided by dealer or via internet) on smartphone or tablet. When installation completes, the LCD will display icon: . 2. Insert the MicroSD card and turn on the DV. Enter in menu and turn on WIFI: 3. Enable WI-FI on smartphone or tablet and search for wireless AP signal “X10000_XXXX”, then connect it to DV, until the system displays “Connected successfully”. Note: the first time connecting to DV, you need to enter password “66666666”. 4.
This app shows in the main display 3 options: video, photo and movement. In the bottom side you can see other 3 options: main display, gallery and options In “options mode” you will be able to configure the camera presets before recording. As in right position image. 11.3. IOS APP 1. Install “ XDV” APP ( provided by dealer or via internet) on iOS phone or tablet. When installation completes, the LCD will display icon . 2.
language Power save 1min/3min/5min/OFF Operation system requirements Windows XP/Vista/7/8/10 or higher and Mac 10.
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
