Operating Manual

Mobile terminal operating manual
5
Note: After configuration, the devi ce will reboot and the Wi-Fi name will become
"xxxx_EXT2.4G"/"xxxx_EXT5G". (xxxx is the name of the original Wi-Fi signal, the password is
the password of the original Wi-Fi signal).
If the repeater works in "Repeater mode", and you want to use the LAN network interface of the
repeater. you have to insert the network cable after the configuration is completed and the
indicator light is steady blue.
5.If you want to modify the repeater Wi-Fi name and password, you need to connect to
the Wi-Fi after successful configuration, and then re-enter the configuration interface,
Click the "Wi-Fi Setup" to Setup (as shown in Figure 12 and Figure 13).
192. 168. 10.1/vie w/ admin_wizar
！
1
Wireless users
Wi-Fi Setup
Signal strength
Advanced settings
192. 168. 10.1/vie w/ admin_wizar
！
1
Wi-Fi Setup
2.4G Wi-Fi Settings
Wi-Fi ON/OFF:
Hide SSID:
Extended 2.4G:
Encryption:
2.4G passwd:
ON
OFF
QLJS-5G_EXT2.4G
WPA2-PSK
5G Wi-Fi Settings
Wi-Fi ON/OFF:
Hide SSID:
Extended 5G:
Encryption:
5G passwd:
ON
OFF
QLJS-5G_EXT5G
WPA2-PSK
Figure 12 Figure 13