Operating Manual

System
Work mode
Setting
Complete
Back Next
Figure 14
Mobile terminal operating manual
7
Work mode
AP mode
System
Work mode
Setting
Complete
Back Next
Encryption: WPA/WPA2 Mix
WiFi password:
Exterded 2.4G:
text
Exterded 5G:
text
System
Work mode
Setting
Complete
System:
Password admin
Work mode
AP mode
Wi-Fi Setup
2.4G SSID
5G SSID
Encryption
WPA/WPA2 Mix
Password
12345678
Back Save
text
text
Figure 15 Figure 16
(3) Router mode:
Routing mode: Wireless router mode, you can set PPPOE, static IP access, automatic
acquisition, usually used for modem dialing Internet access or static IP access mode.
Settings: Insert the network cable into the network interface of the device, select "Router
mode” of the "Work mode"(as shown in Figure 17), and click [Next] to enter the "Routing
Configuration" page. According to the network access mode, select "DHCP client",
"sstatic IP" ,"PPPOE", in the "Internet settings". Set the 2.4G wireless SSID in
"Extended 2.4G", set the 5.8G wireless SSID in ”Extended 5G” and set the wireless
password in "Wi-Fi password" (as shown in Figure 18). After clicking [Save], the device
will restart and apply the new configuration work (as shown in Figure 19). In the routing
mode, the device indicator will be blue when the start-up is completed.