Operating Manual

Mobile terminal operating manual
8
System
Work mode
Setting
Complete
Back Next
Work mode
Router mode
192.168.10.1/view/adm in _w izar
！
1
System
Work mode
Setting
Complete
Back Next
192.168.10.1/view/adm in _w izar
！
1
Internet settings
Encryption: WPA/WPA2 Mix
WiFi password:
Exterded 2.4G:
Exterded 5G:
DHCP client
DHCP client
Static IP
PPPoE
192. 168. 10.1/v ie w/ admin_wizar
1
System
Work mode
Setting
Complete
System:
Password admin
！
Work mode
Router mode
Wi-Fi Setup
Back Save
2.4G SSID
5G SSID
Encryption
WPA/WPA2 Mix
Password
12345678
text
text
Figure 17 Figure 18 Figure 19
Frequently Asked Questions
1.After the device "repeater mode" configuration is complete, the indicator light flashes blue and
the repeater signal cannot be connected to the Internet.
A: The blue indicator light flashes to indicate that the repeater is not successfully
paired, which may be caused by these reasons:
(1)When the wireless router is filled in, the password is incorrectly entered.
Please check if the password is correct.
(2)the original signal is too weak. Please install your mobile device to a better
Wi-Fi signal area to ensure the connection speed of the repeater signal and the
Wi-Fi coverage signal.