User's Manual

TWS WIRELESS EARBUDS
USER MANUAL
Item No.: CPP-4635
FUNCTIONS
LED Indicator
Power ON/OFF
Charging Port
Multifunction
button
LED
Indicator
TURNING ON/OFF EARBUDS
1. After charging the case, lift the earbuds out and the power is
automatically turned ON.You will see the blue and red LED ashing.
2. To turn OFF, place earbuds into the case until they click into place,
the earbuds turn OFF and disconnect with your mobile device.
3. To turn the earbuds OFF outside of the case, press the
multifunction button on either earbud and hold it for 5 seconds,
both earbuds will turn OFF.
4. To turn ON only a single earbud, press the multifunction button on
either earbud and hold it for 5 seconds. Follow the same step to turn
ON the other earbud-they will be connected again automatically.
PAIRING BOTH EARBUDS
The True Wireless Technology (TSW) enables you to use two earbuds
paired via Bluetooth® to create a wireless dual-channel system to
deliver a true stereo sound eect.
1.Lift the earbuds out of the case to activate power. You will hear
sound notice and see the blue and red LED fast ashing on both
earbuds. Both earbuds will be connected automatically in 5 seconds,
and blue and red LED slow ashing on one earbuds as it waits to pair
with your device.
2.Enable Bluetooth® on your mobile device, select "CPP-4635" from
the List of available bluetooth® devices. You will hear sound
conrmation notice and the blue & red LED on earbud turns OFF. The
streaming music will be played simultaneously on both earbuds.
Earbuds will automatically pair if they have already been paired to
the same device. You only need to lift the earbuds out from the case
and connection will be automatic.
LISTENING TO MUSIC
1.After you successfully connect to your Bluetooth® device, select
music to play. Pressing once on the multifunction button of either
earbud will pause your music. Press again to resume play.
2.Triple click on the multifunction button of left earbud to skip to the
previous song.
3.Triple click on the multifunction button of right earbud to skip to
the next song.
4.Volume is controlled from your device, not from the earbuds.
PAIRING ONE EARBUD
Lift one earbud out of the case to activate power, wait until you see
the blue and red LED ashing, select and connect "CPP-4635" from
the list of available Bluetooth® devices. You will hear conrmation
soud and the blue & red LED turns OFF.
If you lift another earbud out of the case, two earbuds will be
automatically connected and the streaming music will be played
simultaneously on both earbuds.
MAKING AND RECEIVING CALLS
1.Be sure the earbuds are connected to your mobile phone, and then
you can make calls.
2.If you choose to use only one earbud, either one is capable of
receiving calls, since each has its own built-in mic.
3.Answer calls by pressing the multifunction button quickly one
time. Press and hold the multifunction button 3 seconds to reject
calls.
4. To make a call back, double click multifunction button.
HOW TO CHARGE THE CHARGING CASE
1. Connect the provided Micro USB cable from your charging case to
a suitable USB power source.
2.Steady Red LED = Charging in progress
3.Red LED turns OFF = Charging complete
NOTE: If charging case battery totally runs out, earbuds cannot turn
on automatically when you lift them out from charging case, you still
can press and hold multifunction button 5 seconds on earbuds to
turns them ON and OFF.
HOW TO CHARGE YOUR EARBUDS
Now that your case is charged, you can take it with you and charge
up your earbuds anywhere and anytime:
1.Insert both earbuds into the charging case until they click into
place, then press the button on charging case to start to charge
earbuds, the blue LED on charging case turns ON during charging.
2. Steady red LED on earbuds =charging in progress
3. Red LED on earbuds turns OFF = charging complete.
FCC ID:
2AUZO-JT893
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Bluetooth® Declaration ID: D035790
The Bluetooth® word mark and Logos are registered trademarks
owned by Bluetooth SIG, Inc.