Manual

ARM A Part sets system A ARM B Part sets system B SET A Same as ARM A (if you prefer to use the word “set”)
SET B Same as ARM B (if you prefer to use the word “set”) FORCE This forces the panel into the Set mode and inhibits any open
zones, tampers or faults
FORCE A This forces the panel into the Part-Set A mode and inhibits
any open zones, tampers or faults
FORCE B This forces the panel into the Part-Set B mode and inhibits
any open zones, tampers or faults
Note: Ask your installer if you are permitted to inhibit zones, tampers and faults
Alternatively you can inhibit zones and tampers with the following commands... SET ** Inhibits all open zones before setting the system SET ## Inhibits all open tampers before setting the system SET *3 Inhibits a specific zone (in this example zone 3)
SET *z3 This command is the same as set *3 above SET *z03 This command is the same as set *3 above SET *z003 This command is the same as set *3 above SET #3 Inhibits a specific tamper circuit (in this example tamper 3)
SET #z3 This command is the same as set #3 above SET #z03 This command is the same as set #3 above SET #z003 This command is the same as set #3 above
SET *p80 Inhibits a specific point-zone (in this example point 80) SET #p80 Inhibit a specific point-tamper (in this example pointer 80)
Other commands
Note: There is a one hour security lockout after seven wrong text commands and/or user codes
!