User Manual HKC 13M4C
Index Introduction Feature settings.......................................... 20 Installation ................................................3 Safety......................................................... 3 PVR/Timeshift ............................................. 21 Warning/Caution .......................................... 4 Set up ........................................................... 22 Main unit descrription.................................. 7 USB Features .............................
Introduction Thank you very much for purchasing your LED TV. It serves as a normal colour TV and a PC monitor. To enjoy your set fully from the very beginning, read this manual carefully and keep it handy for future reference. INSTALLATION 1. Locate the TV in the room where direct light does not strike the screen. Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. 2.
Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO AVOID THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to avoid the risk of electric shock, do not disassemble this equipment by anyone except a qualified service personnel.
Caution - - Caution High voltages are used in the operation of this product. Do not open the product’s casing. Refer servicing to qualified service personnel. - Caution To prevent fire or electrical shock hazard, do not expose the main unit to moisture. Do not place objects filled with liquids, such as vases, on the TV. Caution Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver.
Caution Caution Never stand on, lean on or suddenly push the product or its stand. You should pay special attention to children. Caution Do not place the main unit on an unstable cart stand, shelf or table. Serious injury to an individual, and damage to the television, may result if it should fall. Caution When the product is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet.
Main unit tekst description Control Panel Button Function VOL+ : VOL- : CH+: CH- : MENU : SOURCE : POWER : Volume up. Volume down TV channel up. TV channel down. Press to select the main menu. Select the input signal. Switch on when in standby mode or to enter the standby mode. TV Connections 12 1 1. 2. 3. 4. 2 Earphone VGA Scart PC audio 3 4 5. 6. 7. 8. 5 6 7 LNB input RF (C/T2) antenne Coaxial HDMI 8 9. 10. 11. 12.
Remote tekst Control 1 Indicator light. The red indicator light flashes red to show that the remote is working and sending a signal. ASPECT 2 Switch the TV between on and standby mode. 1 2 3 4 5 6 7 8 9 LIST 0 REPEAT S CH VOL AUDIO GUIDE MENU INPUT OK DVD SETUP BACK PROG EXIT STEP GOTO A-B INDEX HOLD REVEAL SIZE MENU ANGLE FAV TV.RD MIX S.PAGE TITLE SLOW ZOOM CANCEL TEXT 3 Watch the screen in various formats: Auto/4:3/16:9/Zoom/ Subtitels/Smart-zoom.
Remote tekst Control ASPECT 1 2 3 4 5 6 7 8 LIST 0 9 REPEAT S CH VOL AUDIO • To start the timeshift (DTV mode). • To start playing or pause (DTV/USB/DVD mode). INPUT OK DVD SETUP BACK PROG 21 Index: To select the page number of the index in teletext (TV Teletex mode). : Stop playing or recording (USB/DTV/DVD mode). 22 Hold: Freeze a multi-page passage on screen in Teletekst (TV teletekst mode). GUIDE MENU 20 • Access the Teletext items (ATV/DTV mode). • Access menu options.
OSD basic adjustment tekst (First time installation) Installation Guide If this is the first time you are turning on the TV and there are no programs in the TV memory, the INSTALLATION GUIDE menu will appear on the screen. Energy Mode selected MENU EXIT Press and OK to select your preferred picture mode. Press page. to next Home mode: Suitable for a dark room, Backlight brightness will be lower Store model: Normal state. Local country selected MENU local country.
OSD basic adjustment tekst (First time installation) OSD language selected MENU local language. Press EXIT Press and OK to select the to go to previous page. to go to next page or No operation TV AUTO POWER OFF setting selected MENU time of no operation TV auto power EXIT Press and OK to select the off. Press to go to next page or to go to previous page.
OSD basic adjustment (First time installation) Auto search channel way selected MENU EXIT Press and OK to select auto search channel way. Press previous page. to go to the Note: The picture is provided for reference only since the info displayed may be different.
OSD basic adjustment 1. Press MENU to enter the OSD menu. 2. Then press to select the item you want to enter (Picture, Sound, Channel, Feature or Setup). MENUto the submenu. Press to go to the previous EXIT to go Press on OK or menu. 3. Then press in the submenu to select the item you want to enter. 4. Press to change the value of the item. 5. Press MENU to save and return to the previous menu and press EXIT to exit the entire menu. 6.
Picture Picture (image settings) You can select the type of image that best suits your personal preference. Press MENU to enter the OSD menu. Press to select PICTURE in the main MENU EXIT menu, then press OK to confirm. MENU You can change various image options here.
Sound Sound (sound settings) You can select the type of sound that best suits your personal preference. Press MENU to enter the OSD menu. Press to select SOUND in the main MENU EXIT menu, then press OK to confirm. MENU You can change various sound options here.
Channel Channel (channel settings) Press MENU to enter the OSD menu. Press to select CHANNEL in the main MENU EXIT menu, then press OK to confirm. MENU You can change various channel options here. Item Adjustable Standard Description Channel settings • • • • • • • • Default Set the various default channel settings Channel Management Favorite Management Country TV Connection Auto Search DTV Manual Search ATV Manual Search LCN On/Off You select the item you want to change with the buttons.
Channel Auto Search Select AUTO SEARCH with the buttons. Press menu AUTO SEARCH. OK MENU EXIT to enter or the sub Note: Searching for platform will take a long time, please be patient and don’t turn off the TV.
Channel Channel Management Select CHANNEL MANAGEMENT with the buttons. Press the sub menu CHANNEL MANAGEMENT. Delete channels Press to select the channel. Then press the program. OK MENU EXIT to enter or on the remote control to delete Lock channels on the remote control to lock Press to select the channel. Then press the channel. When the password is asked, the default number is ‘0000’. Skip channels Press to select the channel. Then press Press again to cancel the setting.
Channel Favorite Management Select FAVORITE MANAGEMENT with the buttons. Press the sub menu FAVORITE MANAGEMENT. OK MENU EXIT to enter or Then you can add channels to different favorite list by pressing , , , buttons. You can call the favorite list by press ‘FAV’ button after setting.
Feature Feature Press MENU to enter the OSD menu. Press to select FEATURE in the main MENU EXIT menu, then press OK to confirm. MENU You can change various feature options here. Item Adjustable Standard Description Feature settings • • • • • • • • Default Set the various default feature settings Lock Language Clock Sleep Timer Auto Power Off Hearing Impaired CI info PVR/Timeshift You select the item you want to change with the buttons. MENU EXIT to confirm.
PVR Operation (Personal Video Recorder) PVR/Timeshift Select PVR/TIMESHIFT with the buttons. Press menu PVR/TIMESHIFT. OK MENU EXIT to enter or the sub Press the numeric keys and in this menu. You can set channel, date, start time, mode, type and recording length. Note: You will need to check first your inserted USB storage device if the recording speed is sufficient and if the format is right. Otherwise, the task will fail.
Set up Press MENU to enter the OSD menu. Press to select SET UP in the main menu, MENU EXIT then press OK to confirm. MENU MENU EXIT 1. Press to select OSD TIMER and press OK to enter sub-menu, then you can select OSD display time you desire. MENU EXIT 2. Press to select AUTO SCART and press OK to enter sub-menu, then you can select ON or OFF. MENU EXIT sub-menu (only 3. Press to select PC SETUP and press OK to enter available when a PC is connected with the TV).
Set up MENU EXIT auto A. Press to select AUTO ADJUST menu and press OK to do adjustment. B. Press to select HORIZONTAL POSITION and press the to adjust. C. Press to select VERTICAL POSITION and press the to adjust. D. Press to select CLOCK and press the to adjust. E. Press to select PHASE and press the to adjust (Only available when inputting PC signal). MENU EXIT 4. Press to select BLUE SCREEN and press OK to enter sub-menu. You can select ON or OFF. EXIT 5.
USB Features Before entering the MEDIA menu, connect the USB device or memory card. Press the ‘SOURCE’ or ‘INPUT’ button on the remote control and buttons to select ‘MEDIA’ source. Press MENU MENU return to the previous menu and press EXIT Press to select the ‘PHOTO’ option and press to exit the entire menu. OK EXIT to enter. MENU MENU EXIT Press to select drive disk you want to watch, and press OK to enter.
USB Features Press to select the ‘MUSIC’ option and press OK EXIT to enter. MENU MENU EXIT Press to select drive disk you want to watch, and press OK to enter. MENU file you want to listen in the file selecting EXIT Press the and OK to select the menu, then press to play music. Press to select the menu in the right bottom you want to run and then MENU EXIT press OK to operate. Press to select the ‘MOVIE’ option and press OK EXIT to enter.
USB Features Press to select the ‘E-BOOK’ option and press OK EXIT to enter. MENU MENU EXIT Press to select drive disk you want to watch, and press OK to enter. MENU file you want to watch in the file selecting EXIT Press the and OK to select the MENU EXIT menu, then press OK to play. Note: Press different colored button to do different operation according to instruction at the bottom.
DVD Operation Compatible disc formats Disc Logo Disc Types Recorded Content VIDEO DVD-VIDEO (Digital Versatile Disc) Audio + Video R/RW DVD±R (DVD Recordable, Audio/Video Audio + Video + JPEG format or JPEG files) R/RW DVD±RW (Audio/Video format or JPEG files) Audio + Video + JPEG CD-R (Audio/Video format or JPEG files) Audio + Video + JPEG CD-RW (Audio/Video format or JPEG files) Audio + Video + JPEG Audio-CD (CD Digital Audio) Audio Rewritable JPEG 1. The file extensions has to be .
DVD Operation Carefully read the following instructions before turning on the DVD player for the first time! Getting started 1. Connect the device to a main socket using the power supply unit that is delivered with the device. 2. Push the power key on the right side of the TV set. 3. Switch to DVD mode and insert a DVD with the label facing backwards. The DVD player automatically starts playing. Note: An inserted DVD can only be ejected in the DVD Mode. The eject key has no function in other modes.
ASPECT 1 2 3 4 5 6 7 LIST 8 0 1 4 VOL DVD Operation 9 ASPECT REPEAT 2S 3 5 CH 6 9 Play a0 DVD 7 LIST AUDIO 8 GUIDE S MENU VOL REPEAT INPUT OK AUDIO PLAY CH DVD SETUP BACK PROG GUIDE STEP GOTO MENU OKREVEAL INDEX HOLD MENU ANGLE FAV TV.RD MIX BACK TITLE ASPECT SLOW ZOOM PROG STEP 1 EXIT A-B INPUT TEXT GOTO 2 ASPECT HOLD MENU ANGLE TITLE SLOW ZOOM 7 8S LIST VOL 0 TEXT EXIT CANCEL During playing, press once to stop.
ASPECT 1 2 3 4 5 6 7 8 LIST 0 DVD Operation 9 REPEAT S CH VOL AUDIO MENU AUDIO GUIDE MENU S INPUT During playing, allows you to select a language for subtitles or to turn subtitles on/off. A DVD can contain up to 32 subtitle tracks. By pressing this button repeatedly, you can call up the following settings: SUBTITLE 1/N: Subtitle 1 is displayed. GOTO TITLE ANGLE SUBTITLE 2/N: Subtitle 2 is displayed. TV.RD SUBTITLE */N: Subtitle * is displayed. SUBTITLE OFF: No subtitles.
ASPECT 1 2 3 4 5 6 7 8 LIST ASPECT S 1 2 4 5 VOL 7 9 REPEAT 0 CD Operation 3 CH AUDIO 8 GUIDE 6 9 REPEAT 0 CD (Audio, MP3, VCD, SVCD) 3 2 1 When OK you insert a CD in the DVD player while the power is on, the tracks are 5 4 6 played or button to play a specific track. 7 8 in 9 the preset order. Use the LIST MENU ASPECT S AUDIO BACK PROG INPUT CH VOL GUIDE STEP LIST MENU 0 GOTO DVD SETUP EXIT REPEAT A-B During playing, press once to pause.
ASPECT 1 2 3 4 5 6 7 8 LIST 0 CD Operation 9 REPEAT S VOL ASPECT CH 1 AUDIO 2 3 4 GUIDE 5 6 7 8 LIST 0 MENU Press this button once toTV.RD display detailed S information about the disc in the player. GOTO MENU 9 INPUT REPEAT OK S DVD SETUP CH EXIT VOL BACK PROG AUDIO GOTO MENU STEP AUDIO A-B GUIDE INDEX HOLD MENU MENU ANGLE FAV TV.RD MIX TITLE SLOW ZOOM REVEAL SIZE INPUT OKTEXT S.
S CH VOL AUDIO GUIDE MENU CD Operation INPUT OK DVD SETUP BACK PROG ASPECT STEP INDEX HOLD MENU ANGLE FAV 7 TV.RD TITLE SLOW LIST EXIT A-B 3 2 1 4 GOTO 5 REVEAL SIZE 6 8 MIX ZOOM 0 TEXT To jump to the next file. 9 S.PAGE REPEAT CANCEL Press this button once to display detailed TITLE player. ANGLEin the information aboutGOTO the disc TV.RDtime to close the display AUDIOPressSthis button a second window (This function is only available in the folder mode).
N FF DVD system settings In this section, you will learn how to customize the default settings of the system according to your needs. ASPECT 1 2 3 4 5 6 7 8 9 Note: 0 Only change the system settings if there is no disc in the DVD player or if the DVD player is not in operation.
:3 PS :3 LB 6:9 WIDE T/RT TEREO NGLISH RANCAIS EUTSCH ALIANO SPANOL ORTUGUES PAL LISH AUTO NTSC ID SAFE G G 13 GR C 17 DULT N FF ESE DVD system settings General Setup TV DISPLAY OSD LANGUAGE SCREEN SAVER LAST MEMORY WIDE ENG ON ON ENGLISH FRANCAIS DEUTSCH ITALIANO ESPANOL PORTUGUES OSD Language. To set the language for the onscreen menu. General Setup Highlight the option using the buttons. Switch to the option’s setting by pressing OK orEXIT .
:3 PS :3 LB 6:9 WIDE T/RT TEREO NGLISH RANCAIS EUTSCH ALIANO SPANOL ORTUGUES PAL AUTO LISH NTSC ID SAFE G G 13 GR C 17 N DULT FF ESE General Setup TV DISPLAY OSD LANGUAGE SCREEN SAVER LAST MEMORY General Setup WIDE ENG ON ON ENGLISH FRANCAIS DEUTSCH ITALIANO ESPANOL PORTUGUES TV DISPLAY OSD LANGUAGE SCREEN SAVER LAST MEMORY WIDE ENG ON ON DVD system settings ON OFF System Setup SYSTEM SETUP General Setup TV TYPE TV DISPLAY General Setup AUDIO OSD LANGUAGE DISC MENU TV DISPLAY SCREEN SAVER PARE
SYSTEM SETUP T/RT TEREO TV TYPE AUDIO DISC MENU PARENTAL PASSWORD DEFAULT SYSTEM SETUP PAL ENG ENG ENG PAL AUTO NTSC General Setup NGLISH RANCAIS EUTSCH ALIANO SPANOL ORTUGUES LISH TV DISPLAY OSD LANGUAGE SCREEN SAVER LAST MEMORY General Setup WIDE ENG ON ON TV DISPLAY WIDE OSD LANGUAGE ENG SCREEN SAVER SYSTEM SETUP ON LAST MEMORY ON PAL TV TYPE ENG AUDIO ENG DISC MENU ENG PARENTAL PASSWORD DEFAULT SYSTEM SETUP PAL AUTO NTSC ID SAFE G G 13 GR C 17 DULT TV TYPE AUDIO DISC MENU PARENTAL Genera
tekst 38
Specifications RGB-input Mode Resolution Horizontal Frequency (KHz) Vertical Frequency (KHz) VGA 640 x 480 31.5 60 DOS SVGA XGA WXGA 720 x 400 31.5 800 x 600 37.9 1.024 x 768 48.4 70 60 60 1.366 x 1.080 47.7 60 Mode Resolution Horizontal Frequency (KHz) Vertical Frequency (KHz) 480i 720 x 480i 15.73 59.94/60 31.47 59.94/60 HDMI-input VGA 576i 640 x 480 31.47 59.94 720 x 576i 15.63 576p 720 x 576p 720p 1.280 x 720p 1.080i 1.920 x 1.080i 1.080p 1.920 x 1.080p 31.
Troubleshooting Before contacting our service department you can go through the following for possible solutions. Problem Solution No picture, no sound • Check the cable between TV and antenna/external AV device. • Press the power button on the remote. • Press the SOURCE button the remote, then press the button repeatedly to select the TV source.
Troubleshooting USB files are played jerkily • The speed of the USB storage device can affect the speed of data transfer to the TV, preventing image and / or sound from being smoothly displayed. The TFT LED panel uses a panel consisting of sub pixels which requires sophisticated technology to produce. However, there may be a small number of bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
Useful Information and Licences Guarantee We regret it when a HKC product doesn’t work as it should, despite our careful quality control. That is why we offer a 2-year manufacturer’s warranty after the date of purchase on all our models. This guarantee is a pick-up and return guarantee. This means that we take care of the return of the product to our repair and service center. We will thoroughly check the product and solve the problem. We will send the product back to your home within 7 working days.
Useful Information and Licences EC directives internet address: https://eur-lex.europa.eu/browse/summaries.html?locale=en The symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
tekst 44
tekst About HKC The HKC brand was established in 1997 as a manufacturer of PC monitors thanks to the good quality and specific technical production process. HKC quickly grew into a TOP 3 Producer of monitors on the Chinese market. In 2003 HKC started producing LCD televisions, over the years, HKC has bought many suppliers which now makes all parts of the TV in-house, so HKC has one of the only open-cell assembly lines where the LCD of the TV is made.
