User Manual HKC 16M4
Index Introduction Channel settings ........................................ 16 Installation ................................................3 Auto search .......................................... 17 Safety......................................................... 3 Channel Management ....................... 18 Favorite Management ....................... 19 Warning/Caution .......................................... 4 Feature settings.......................................... 20 Main unit descrription.
Introduction Thank you very much for purchasing your LED TV. It serves as a normal colour TV and a PC monitor. To enjoy your set fully from the very beginning, read this manual carefully and keep it handy for future reference. INSTALLATION 1. Locate the TV in the room where direct light does not strike the screen. Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. 2.
Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO AVOID THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to avoid the risk of electric shock, do not disassemble this equipment by anyone except a qualified service personnel.
Caution - - Caution High voltages are used in the operation of this product. Do not open the product’s casing. Refer servicing to qualified service personnel. - Caution To prevent fire or electrical shock hazard, do not expose the main unit to moisture. Do not place objects filled with liquids, such as vases, on the TV. Caution Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver.
Caution Caution Never stand on, lean on or suddenly push the product or its stand. You should pay special attention to children. Caution Do not place the main unit on an unstable cart stand, shelf or table. Serious injury to an individual, and damage to the television, may result if it should fall. Caution When the product is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet.
Main unit tekst description Control Panel Button Function VOL+ : VOL- : CH+: CH- : MENU : SOURCE : POWER : Volume up. Volume down TV channel up. TV channel down. Press to select the main menu. Select the input signal. Switch on when in standby mode or to enter the standby mode. TV Connections 12 1 1. 2. 3. 4. 2 Earphone VGA Scart PC audio 3 4 5. 6. 7. 8. 5 6 7 LNB input RF (C/T2) antenne Coaxial HDMI 8 9. 10. 11. 12.
Remote tekst Control 1 Indicator light. The red indicator light flashes red to show that the remote is working and sending a signal. ASPECT 2 Switch the TV between on and standby mode. 1 2 3 4 5 6 3 Watch the screen in various formats: Auto/4:3/16:9/Zoom/ Subtitels/Smart-zoom. 7 8 9 4 Mute and restore your TV sound. LIST 0 REPEAT S CH VOL AUDIO MENU 5 0-9 numbers. Press to select a programme. 6 List. Display the channel list (ATV/DTV mode).
Remote tekst Control ASPECT 1 2 3 4 5 6 7 8 LIST 0 9 REPEAT S CH VOL AUDIO MENU 21 Index: To select the page number of the index in teletext (TV Teletex mode). : Stop playing or recording (USB/DTV mode). 22 Hold: Freeze a multi-page passage on screen in Teletekst (TV teletekst mode). INPUT OK DVD SETUP BACK 20 • Access the Teletext items (ATV/DTV mode). • Access menu options. PROG (RED) • Display the channel menu (ATV/DTV mode). • Access menu options. STEP (GREEN) Access menu options.
OSD basic adjustment tekst (First time installation) Installation Guide If this is the first time you are turning on the TV and there are no programs in the TV memory, the INSTALLATION GUIDE menu will appear on the screen. Energy Mode selected MENU EXIT Press and OK to select your preferred picture mode. Press page. to next Home mode: Suitable for a dark room, Backlight brightness will be lower Store model: Normal state. Local country selected MENU local country.
OSD basic adjustment tekst (First time installation) OSD language selected MENU local language. Press EXIT Press and OK to select the to go to previous page. to go to next page or No operation TV AUTO POWER OFF setting selected MENU time of no operation TV auto power EXIT Press and OK to select the off. Press to go to next page or to go to previous page.
OSD basic adjustment (First time installation) Auto search channel way selected MENU EXIT Press and OK to select auto search channel way. Press previous page. to go to the Note: The picture is provided for reference only since the info displayed may be different.
OSD basic adjustment 1. Press MENU to enter the OSD menu. 2. Then press to select the item you want to enter (Picture, Sound, Channel, Feature or Setup). MENUto the submenu. Press to go to the previous EXIT to go Press on OK or menu. 3. Then press in the submenu to select the item you want to enter. 4. Press to change the value of the item. 5. Press MENU to save and return to the previous menu and press EXIT to exit the entire menu. 6.
Picture Picture (image settings) You can select the type of image that best suits your personal preference. Press MENU to enter the OSD menu. Press to select PICTURE in the main MENU EXIT menu, then press OK to confirm. MENU You can change various image options here.
Sound Sound (sound settings) You can select the type of sound that best suits your personal preference. Press MENU to enter the OSD menu. Press to select SOUND in the main MENU EXIT menu, then press OK to confirm. MENU You can change various sound options here.
Channel Channel (channel settings) Press MENU to enter the OSD menu. Press to select CHANNEL in the main MENU EXIT menu, then press OK to confirm. MENU You can change various channel options here. Item Adjustable Standard Description Channel settings • • • • • • • • Default Set the various default channel settings Channel Management Favorite Management Country TV Connection Auto Search DTV Manual Search ATV Manual Search LCN On/Off You select the item you want to change with the buttons.
Channel Auto Search Select AUTO SEARCH with the buttons. Press menu AUTO SEARCH. OK MENU EXIT to enter or the sub Note: Searching for platform will take a long time, please be patient and don’t turn off the TV.
Channel Channel Management Select CHANNEL MANAGEMENT with the buttons. Press the sub menu CHANNEL MANAGEMENT. Delete channels Press to select the channel. Then press the program. OK MENU EXIT to enter or on the remote control to delete Lock channels on the remote control to lock Press to select the channel. Then press the channel. When the password is asked, the default number is ‘0000’. Skip channels Press to select the channel. Then press Press again to cancel the setting.
Channel Favorite Management Select FAVORITE MANAGEMENT with the buttons. Press the sub menu FAVORITE MANAGEMENT. OK MENU EXIT to enter or Then you can add channels to different favorite list by pressing , , , buttons. You can call the favorite list by press ‘FAV’ button after setting.
Feature Feature Press MENU to enter the OSD menu. Press to select FEATURE in the main MENU EXIT menu, then press OK to confirm. MENU You can change various feature options here. Item Adjustable Standard Description Feature settings • • • • • • • • Default Set the various default feature settings Lock Language Clock Sleep Timer Auto Power Off Hearing Impaired CI info PVR/Timeshift You select the item you want to change with the buttons. MENU EXIT to confirm.
PVR Operation (Personal Video Recorder) PVR/Timeshift Select PVR/TIMESHIFT with the buttons. Press menu PVR/TIMESHIFT. OK MENU EXIT to enter or the sub Press the numeric keys and in this menu. You can set channel, date, start time, mode, type and recording length. Note: You will need to check first your inserted USB storage device if the recording speed is sufficient and if the format is right. Otherwise, the task will fail.
Set Up Press MENU to enter the OSD menu. Press to select SET UP in the main menu, MENU EXIT then press OK to confirm. MENU MENU EXIT 1. Press to select OSD TIMER and press OK to enter sub-menu, then you can select OSD display time you desire. MENU EXIT 2. Press to select AUTO SCART and press OK to enter sub-menu, then you can select ON or OFF. MENU EXIT sub-menu (only 3. Press to select PC SETUP and press OK to enter available when a PC is connected with the TV).
Set Up MENU EXIT auto A. Press to select AUTO ADJUST menu and press OK to do adjustment. B. Press to select HORIZONTAL POSITION and press the to adjust. C. Press to select VERTICAL POSITION and press the to adjust. D. Press to select CLOCK and press the to adjust. E. Press to select PHASE and press the to adjust (Only available when inputting PC signal). MENU EXIT 4. Press to select BLUE SCREEN and press OK to enter sub-menu. You can select ON or OFF. EXIT 5.
USB Features MENU EXIT Press to select drive disk you want to watch, and press OK to enter. MENU file you want to watch in the file selecting EXIT Press the and OK to select the menu, then press to play picture. Press to delete the selected photo and to add all photos to the playlist. To select menu in the bottom you want to run Press and then press OK to EXIT operate. You can see the information of the current playing picture after pressing the INFO button, then press to play or pause.
USB Features Press to select the ‘MUSIC’ option and press OK EXIT to enter. MENU MENU EXIT Press to select drive disk you want to watch, and press OK to enter. MENU file you want to listen in the file selecting EXIT Press the and OK to select the menu, then press to play music. Press to select the menu in the right bottom you want to run and then MENU EXIT press OK to operate. Press to select the ‘MOVIE’ option and press OK EXIT to enter.
USB Features Press to select the ‘E-BOOK’ option and press OK EXIT to enter. MENU MENU EXIT Press to select drive disk you want to watch, and press OK to enter. MENU file you want to watch in the file selecting EXIT Press the and OK to select the MENU EXIT menu, then press OK to play. Note: Press different colored button to do different operation according to instruction at the bottom.
Specifications RGB-input Mode Resolution Horizontal Frequency (KHz) Vertical Frequency (KHz) VGA 640 x 480 31.5 60 DOS SVGA XGA WXGA 720 x 400 31.5 800 x 600 37.9 1.024 x 768 48.4 70 60 60 1.366 x 1.080 47.7 60 Mode Resolution Horizontal Frequency (KHz) Vertical Frequency (KHz) 480i 720 x 480i 15.73 59.94/60 31.47 59.94/60 HDMI-input VGA 576i 640 x 480 31.47 59.94 720 x 576i 15.63 576p 720 x 576p 720p 1.280 x 720p 1.080i 1.920 x 1.080i 1.080p 1.920 x 1.080p 31.
Troubleshooting Before contacting our service department you can go through the following for possible solutions. Problem Solution No picture, no sound • Check the cable between TV and antenna/external AV device. • Press the power button on the remote. • Press the SOURCE button the remote, then press the button repeatedly to select the TV source.
Troubleshooting USB files are played jerkily • The speed of the USB storage device can affect the speed of data transfer to the TV, preventing image and / or sound from being smoothly displayed. The TFT LED panel uses a panel consisting of sub pixels which requires sophisticated technology to produce. However, there may be a small number of bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
Useful Information and Licences Guarantee We regret it when a HKC product doesn’t work as it should, despite our careful quality control. That is why we offer a 2-year manufacturer’s warranty after the date of purchase on all our models. This guarantee is a pick-up and return guarantee. This means that we take care of the return of the product to our repair and service center. We will thoroughly check the product and solve the problem. We will send the product back to your home within 7 working days.
Useful Information and Licences EC directives internet address: https://eur-lex.europa.eu/browse/summaries.html?locale=en The symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
About HKC The HKC brand was established in 1997 as a manufacturer of PC monitors thanks to the good quality and specific technical production process. HKC quickly grew into a TOP 3 Producer of monitors on the Chinese market. In 2003 HKC started producing LCD televisions, over the years, HKC has bought many suppliers which now makes all parts of the TV in-house, so HKC has one of the only open-cell assembly lines where the LCD of the TV is made.
