User Manual HKC P7H6
Index Introduction Image settings ............................................ 14 Installation ................................................3 Safety......................................................... 3 Sound settings ........................................... 15 Warning/Caution .......................................... 4 Time settings .............................................. 16 Main unit description................................... 7 Option settings ................................
Introduction Thank you very much for purchasing your LED TV. It serves as a normal colour TV and a PC monitor. To enjoy your set fully from the very beginning, read this manual carefully and keep it handy for future reference. INSTALLATION 1. Locate the TV in the room where direct light does not strike the screen. Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. 2.
Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO AVOID THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to avoid the risk of electric shock, do not disassemble this equipment by anyone except a qualified service personnel.
Caution - - Caution High voltages are used in the operation of this product. Do not open the product’s casing. Refer servicing to qualified service personnel. - Caution To prevent fire or electrical shock hazard, do not expose the main unit to moisture. Do not place objects filled with liquids, such as vases, on the TV. Caution Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver.
Caution Caution Never stand on, lean on or suddenly push the product or its stand. You should pay special attention to children. Caution Do not place the main unit on an unstable cart stand, shelf or table. Serious injury to an individual, and damage to the television, may result if it should fall. Caution When the product is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet.
Main unit tekst description Control Panel Button Function VOL+ : VOL- : CH+: CH- : MENU : SOURCE : POWER : Volume up. Volume down TV channel up. TV channel down. Press to select the main menu. Select the input signal. Switch on when in standby mode or to enter the standby mode.
Remote tekst Control Switch the TV between on and standby mode. POWER P.MODE S.MODE MUTE EPG S.TITLE TEXT AUDIO VOL TV RADIO VOL+ CH+ SOURCE P.MODE Select the picture mode. S.MODE Select the sound mode. Mute and restore your TV sound. 0-9 0-9 numbers. Press to select a programme. EPG Displays the EPG (Electronic Programme Guide). S.TITLE Start or close subtitles (DTV and MEDIA mode). TEXT Access the Teletext items, if available (TV mode).
OSD basic adjustment Installation Guide If this is the first time you are turning on the TV and there are no programs in the TV memory, the installation Guide menu will appear on the screen. 1. Press the / buttons to select the language. 2. Press the / buttons to select the local country. Note: Searching for platform will take a long time, please be patient and don’t turn off the TV.
OSD basic adjustment Channels Press MENU to display the main menu. Press to select ‘CHANNEL’ in the main menu. MENU Auto Tuning Press and select ‘Auto Tuning’. Confirm selection with ENTER . Tune Type (DTV + ATV) Press and select DTV (digital) or ATV (analog). Confirm selection with Press to select the country. Press ENTER to start the search. Press MENU to skip or EXIT to stop. ENTER . MENU Turn on “Sorting by LCN” to put the channels in logical order.
OSD basic tekst adjustment Manual tuning DTV Manual Tuning (digital) Press to select ‘DTV Manual Tuning’ in the menu. Confirm selection with ENTER . Press MENU to skip or EXIT to stop. MENU ATV Manual Tuning (analog) Press to select ‘ATV Manual Tuning’ in the menu. Confirm selection with ENTER . Press MENU to skip or EXIT to stop.
OSD basic tekst adjustment Program Edit Press to select ‘Programme Edit’ in the menu. Confirm selection with Press MENU to skip or EXIT to stop. ENTER MENU Delete channels Press to select the program. Then press delete the program. on the remote control to Skip channels Press to select the program. Then press again to cancel. to skip the channel. Press Move channels Press to select the program. Then press . Press again to confirm. to move the channel with 12 .
OSD basic tekst adjustment Antenna Power Press to select ‘Antenna power’ in the menu. If you use the supplied antenna, it must be switched on. Use to choose between on or off. Software update (only possible via external USB) Press to select ‘Software Update USB’ in the menu. Confirm selection with ENTER .
Picture (image tekst settings) Picture (image settings) You can select the type of image that best suits your personal preference. Press MENU to enter the OSD menu. Then press to select the ‘PICTURE’ menu. Press to select ‘Picture Mode’. Then press ENTER to select. MENU You can change various image options here.
Sound (sound tekst settings) Sound (sound settings) You can select the type of sound that best suits your personal preference. Press MENU to enter the OSD menu. Then press to select the ‘SOUND’ menu. Press to select ‘Sound Mode’. Then press ENTER to select. MENU You can change various sound options here.
Time (time tekstsettings) Time (time settings) You can select the type of sound that best suits your personal preference. Press MENU to enter the OSD menu. Then press to select the ‘TIME’ menu. Press and select the desired item that you want to adjust/set. Then press ENTER to select. MENU You can change various time options here.
Option (various tekst menu settings) Option (various menu settings) You can set various menu preferences here. Press MENU to enter the OSD menu. Then press to select the ‘OPTION’ menu. Press and select the desired item that you want to adjust/set. Then press ENTER to select. MENU You can change various menu setting here.
Lock (lock/protect tekst settings) Lock (lock/protect settings) You can lock/protect various settings here. Press MENU to enter the OSD menu. Then press to select the ‘LOCK’ menu. Press and select the desired item that you want to adjust/set. Then press ENTER to select. MENU You can change various lock options here.
Electronic Program tekst Guide (EPG) Electronic Program Guide (EPG) provides program information which will be broadcasted now or in the future. The system will display EPG window by pressing EPG . DATE and TIME information is displayed on the right of the window. The left side shows all channels. The right side shows the programs in the channel. The selected program is also displayed on the top of the screen. Press to select the program. You can press to enter record mode.
PVR Operation (Personal tekst Video Recorder) PVR systeem (Personal Video Recorder) Press MENU to enter the OSD menu. Then press to select the ‘OPTION’ menu. Press and select the option PVR. Press ENTER to enter the sub menu. MENU Here you can select, check and format the external drive. Note: Recording must be on an external hard drive (PVR). This is formatted for use. So make sure there are no other important documents on this.
USBtekst Features Press on the remote control SOURCE . Then select the ‘MEDIA’ menu. Photo Press to select ‘PHOTO’. Press ENTER to confirm the selection. Press the buttons to select the disk drive or file that you want to see. Press ENTER to confirm the selection. Press EXIT to return to the previous step or menu. It works the same for Music, Photo and Folder. Note: The images related to the function are for reference only.
Specifications tekst HDMI-input Mode Resolution Horizontal Frequency (KHz) 576i 720 x 576i 15.63 576p 720 x 576p 720p 1.280 x 720p 1.080i 1.920 x 1.080i 1.080p 1.920 x 1.080p 31.26 37.50 44.96 28.13 33.75 56.25 67.5 480i 480p 720 x 480i 720 x 480p 15.73 31.47 Vertical Frequency (KHz) 59.94/60 50 59.94/60 50 50 59.94/60 50 59.94/60 50 59.94/60 Due to continuous product development, specifications are subject to change without prior notice.
Troubleshooting tekst Before contacting our service department you can go through the following for possible solutions. Problem Solution No picture, no sound • Check the cable between TV and antenna/external AV device. • Press the power button on the remote. • Press the SOURCE button the remote, then press the button repeatedly to select the TV source.
Troubleshooting tekst USB files are played jerkily • The speed of the USB storage device can affect the speed of data transfer to the TV, preventing image and / or sound from being smoothly displayed. The TFT LED panel uses a panel consisting of sub pixels which requires sophisticated technology to produce. However, there may be a small number of bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
Useful Information tekst and Licences Guarantee We regret it when a HKC product doesn’t work as it should, despite our careful quality control. That is why we offer a 2-year manufacturer’s warranty after the date of purchase on all our models. This guarantee is a pick-up and return guarantee. This means that we take care of the return of the product to our repair and service center. We will thoroughly check the product and solve the problem. We will send the product back to your home within 7 working days.
Useful Information tekst and Licences EC directives internet address: https://eur-lex.europa.eu/browse/summaries.html?locale=en The symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
About HKC The HKC brand was established in 1997 as a manufacturer of PC monitors thanks to the good quality and specific technical production process. HKC quickly grew into a TOP 3 Producer of monitors on the Chinese market. In 2003 HKC started producing LCD televisions, over the years, HKC has bought many suppliers which now makes all parts of the TV in-house, so HKC has one of the only open-cell assembly lines where the LCD of the TV is made.
