Operation Manual

9
PICTURE
You can select the type of picture, which best corresponds to your viewing.
1. Press the “MENU” button to enter the OSD menu. Then press “c/d” button to select the
“PICTURE” menu.
2. Press “c/d” button to select “Picture Mode” and Press “e/f” button to select
3. Press “c/d” button to select “Contrast” and press the “e/f” button to enter contrast
adjustment menu to adjust contrast.
4. Press “c/d” button to select “Brightness” and press the “e/f” button to enter brightness
adjustment menu to adjust brightness.
5. Press “c/d” button to select “Color” and press the “e/f” button to enter color
adjustment menu to adjust color.
6. Press “c/d” button to select “Tint” and press the “e/f” button to enter hue adjustment
menu to adjust tint.
Note: The 'Tint' item is used in NTSC mode only.
7. Press “c/d” button to select “Sharpness” and press the “e/f” button to enter sharpness
adjustment menu to adjust sharpness.
8. Press “c/d” button to select “Color Temperature” and Press the “e/f” button to select.
9. Press “c/d” button to select “Aspect Ratio” and Press “e/f” button to select.
10.
Press “c/d” button to select “Noise Reduction ” and Press “e/f” button to select.
11. Press the “Menu” button to return to upper-menu.
Return
OSD Basic Adjustment