User's Manual

BT-3002 BT V1.2 USB Module
BT-3002 User’s Manual
華朗科技股份有限公司 HL-Tech Corporation
HL-Tech Corporation
8
9. Adding a modem
In Windows XP SP2, you can add a Bluetooth device that has support for dial-up networking as a modem. To do this,
follow these steps:
1.
Click Start, click Run, type telephon.cpl, and then click OK.
2.
On the Modems tab, click Add.
The
Select Bluetooth Device dialog box opens.
3.
Click to select a Bluetooth device to use as a modem.
If you configure Windows to detect modems while a Bluetooth adapter is connected, Windows automatically opens
Select Bluetooth Device when it detects a Bluetooth device that has support for dial-up networking.
After you select a device, you can configure the device by using Phone and Modem Options. To connect to the
Internet, you can create a new connection in the Network Connections folder.
Notes on modem support
•
Windows XP automatically generates a passkey for the connection between the mobile phone and your
computer. You can use this passkey or enter one of your own. Passkeys can have up to 16 characters. The
passkey must be entered within 30 seconds, or authentication may not succeed.
•
Some mobile phones already have a passkey. If your phone has a passkey, enter the passkey in the
Bluetooth Connection Wizard.
•
Bluetooth is not a secure wireless technology. Your data may be visible to other devices or computers that
are in range.
•
If your mobile phone does not support dial-up networking, you cannot install the phone by using the Add
Hardware Wizard. To install the phone, use
Bluetooth Devices.
•
When a mobile phone is connected as a modem, it appears in Device Manager as a modem.
10. Adding a printer
Windows XP SP2 supports Bluetooth printers. You can use the Add Printer Wizard to access printer features. To
start the Add Printer Wizard, click Start, click Printers and Faxes, and then click Add a printer.
When you select A Bluetooth printer in the Add Printer Wizard, your computer searches for Bluetooth printers.
When your computer locates a printer, you can select it to install. To install the printer, you have to install drivers
for the printer, just as you do for any other type of printer.
When the printer is installed, the printer port appears as a Bluetooth virtual printer port on the Ports tab of the
printer's Properties dialog box.