User's Manual

More settings

A. Click on the Change/Apply button to modify the settings in the General Connection Setting

field.

B. Select the channel in ad-hoc mode from the Channel drop-down menu.

C. Select the transmission speed from the Tx Rate drop-down menu.

D. Unpick the Any box to select another network SSID.

E. Select Infrastructure or Ad-hoc mode from the Network Type drop-down menu.

F. Select Open System, Shared Key, Auto, WPA, WPA PSK, WPA2 or WPA2 PSK from the

Authentication Mode drop-down menu.

G. Select Disable, WEP, TKIP or AES from the Encryption drop-down menu.

H. Click on the WEP Encryption Key Setting button to modify the WEP key settings. A new

screen will appear (see hereafter).

I. Click on the WPA Encryption Key Setting button to modify the WPA key settings. A new

screen will appear (see hereafter).

J. Select a previously saved profile from the Profile Name drop-down menu, and click on the

Load button to load the profile into memory. Alternatively, key in the profile name and click

on the Save Current or Delete button to respectively save or remove the profile.

K. For advanced settings or information about the software, click on the Advanced Settings or

the Information button.