User's Manual

HL-TECH Corporation
10
1.1.2.2 WPA Setting
Press “
WPA Encryption Setting” in Figure 1-2 to enter the “WPA Setting” page
Figure 1-4
 You can select the WPA authentication protocol “
TLS” or “PEAP” from “Protocol”
filed. The TLS is used , the User name and Password need not to be used , but the
Certificate need to be used. If the PEAP is used , the User name , Password and
Certificate need to be used.
 If you select “
pre-share-key” protocol , you can write down your password on the
filed of “
Passphrase” , the password length can be selected from 8 bytes to 63 bytes
(ASCII format) depend on user .