User's Manual

HL-TECH Corporation
12
1.1.4
Setup Other Group:
Press “
Advanced setting” in Figure 1-2 to enter the “Advanced setting” page.
Figure 1-6
 Select the Window User Interface by the “Language” down drop menu. If the
English item is selected, all functions of window are described with English. Select
the
Traditional Chinese item, and they are described with Traditional Chinese.
 At “
Power consumption Setting” group, select which power save level want to be set
by checking CAM Mode, Maximum Power-Saving mode or Fast Power-Saving
mode. The default is CAM mode. If the most save mode want to use, select the
Maximum Power-Saving mode, but it throughput is lower than CAM and Fast
Power-Saving mode. The throughput of “
Fast Power-Saving mode” is better than
“
Maximum Power-Saving mode”, but its power save is less than “Maximum
Power-Saving mode
”.
 At “
Country Roaming” group, the default depends on the region of EEPROM.
Select other region from “
User Select” drop down menu, or check “World Mode”
item to set it to the word mode. When the word mode is set, it depends on the
behavior of AP. If the WLAN card is re-plug , the setting will return to default
setting.
 At “
Fragmentation Threshold” bar, drop and move cursor to set the fragmentation
threshold point, the range is from 256 to 2346 bytes.
 At “
RTS / CTS Threshold” bar, drop and move the cursor to set the RTS threshold
point, the range is from 0 to 2347 bytes.