User's Manual

HL-TECH Corporation
13
2. Access Point
Figure 2-1
Open the WL-3002B Configuration Utility shown as Figure 2-1. For the soft AP, please
option the “
Access Point” from drop down menu Mode filed.
 “
Network Adapter” shows the available WLAN card for soft AP.
 If the WLAN stations link to the Soft AP , their MAC address will be shown on the
filed of the “
Station MAC Address”.
 The current status of the AP is shown on the “
current Network Setting”. It can show
which
Channel is used, and what is the AP’s SSID. You can know if the WEP is
disable or enable. The
Tx power level is shown on it too (The is function not
available now).
 The
Tx Frame shows how many frames transmitted by the soft AP.
 The
Rx Frame shows how many frames received by the soft AP.