User's Manual
HL-TECH Corporation
15
2.1.1 WEP Key Setting
Press the “
Setting” icon of WEP in Figure 2-2 to open the “WEP key setting” shown as
Figure 2-3.
Figure 2-3
Modify the contents of “
WEP Key setting”, when it is finished, press “Apply” to
save it. Select which key length 64,128 or 256 bits will be modified or used by “
Key
Length
” item. Select which key set will be use by the field of “Default Key ID”.
Modify the 4 sets key depending on the selected key length on the field of “
Key
Value
”. The key value is used the hexadecimal format. Select which key format
“Hexadecimal” or “ASCII” will be used from the “Key Format”.