User's Manual

HL-TECH Corporation
7
Setup WL-3002B Configuration Utility
1. Station:
Figure 1-1
Open the WL-3002B Configuration Utility shown as Figure 1-1. The adapter can be set at
“
Station” or “Access Point” Mode from the Mode drop down menu. Station mode is
selected for the item.
 You can site survey the neighboring SSID site by pressing the “
Refresh”, then sites
name and signals strength of available SSID sites are shown on the “
Available
Network
” field.
 Double click the SSID site from “
Available Network” field, and the SSID can be
connected directly.
 The information of the SSID is shown on the “
Current Network Information”.
 Show the BSSID of connecting AP on the “
Link Status” filed.
 “
Signal Strength” and “Link Quality” shown on diagrammatic curve, and described
with percentage.
 Record the number of Tx frames on the filed of “
Tx Frame”.
 Record the number of Rx frames on the filed of “
Rx Frame”.