User's Manual

HL-TECH Corporation
8
1.1 More Setting
Press “
Connetc this site “ in Figure 1-1to enter “More setting“ window.
Figure 1-2
1.1.1 “
General Connection Setting” group:
 Read the current status from the group if the “
Change” button is not pressed.
 Press “
Change” button for modifying the status, when the modification is finished,
press “
Apply” to save it. The button “Change” and “Apply” is alternately shown on
the same position.
 Modify the SSID name from the “
SSID” field. When use the item, the “any “will be
unchecked previously.
 Change the channel by drop down menu “
Channel”. When use the item, the
Ad_Hoc Mode will be set previously.
 Select the transmission rate by “
Tx Rate” drop down menu.
 Select the “
Ad_Hoc” or “Infrastructure” Mode by the “Network Type”

drop down menu.
 Select the “
Enable WEP” or “Disable WEP” by the “Encryption” drop
 down menu.
 Select the “
Open System” , “Shared Key” mode or “Auto” from the
 “
Authentication Mode” drop down menu.