User's Manual

HL-TECH Corporation
9
1.1.2 Encryption Setting
1.1.2.1 WEP Key Setting
Press “
WEP Encryption Setting” in Figure 1-2 to enter the “WEP Key Setting” page
Figure 1-3
 Select the “
Open System” , “Shared Key” mode or “Auto” from the “authentication
Mode
” drop down menu.
 Press the “
Change” button to modify the contents of “WEP Key setting”, when it is
finished, press “
Apply” to save it. The button “Change” and “Apply” is alternately
shown on the same position.
 Select which key length 64,128 or 256 bits will be modified or used by “
Key
Length
” item.
 Select which key set will be use by the field of “
Default Key ID”
 Modify the 4 sets key depending on the selected key length on the field of “
Key
Value
”. The key value is used the hexadecimal format.
 Select which key format “hexadecimal” or “ASCII” will be used from the “
Key
Format
”