User's Manual

http://www.hltech.com.tw
Tel. NO.: 886-2-27978836
Fax. NO.: 886-2-27977358
6
The last choose with AP Mode, you can use this choose to change
WL-8005 working type. The WL-8005 default setting is working in
Client Mode. So the last choose is “AP Mode”. When you select this
choose, it will change to Reboot Page to request reboot device. After
reboot, the WL-8005 will change working type to AP Mode. In this time
the last choose will change to Client Mode. You can do opposite
process to change back Client Mode.
Example 2.1.1: AP Client Mode to AP Mode
Example 2.1.1: AP Mode to AP Client Mode