Safety Instructions

currentlighting.com
© 2022 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice.
All values are design or typical values when measured under laboratory conditions.
Page 2 of 3
(Rev 09/13/22)
NXSMDT-OMNI-Install-Sheet
NXSMDT-OMNI Digital Smart Sensor is a combination Passive Infrared and Ultrasonic Occupancy Sensor with Closed Loop Daylight
Harvesting specifically designed for ceiling mount applications. When used with corresponding NXRCFX2 Series Room Controller, the
NXSMDT-OMNI Digital Sensor can be programmed to provide Automatic On/O control based on occupancy and/or Automatic Light
Level Control based on the amount of ambient daylight. The NXSMDT-OMNI Digital Sensor also includes an Integral Bluetooth® for
wireless networking and ladder-less programming from a mobile device. The NXSMDT-OMNI Digital Sensor can be configured via the
NX Lighting Controls mobile application and can be utilized in either stand alone or networked applications with other NX Room Control
or NX Network devices.
CONSTRUCTION
• Housing: Rugged injection molded
plastic, Polylac FR-ABS, (UL-94 5VA)
flame class rating
• Color: White, Black (MTS); Gray
(MTO)
• 5.0oz (141.7g)
• Dimensions:
4.0” (101.60mm)
W x 1.5” (38.10mm)
MOUNTING
• Mounting base provided
• Recommended mounting height:
8 (2.44m) with a max mounting height
of 12 (3.66m)
ELECTRICAL
Input:
• Input Voltage: 12 - 24VDC supplied by
NXRCFX2 (NX Room Controller)
• Power Consumption: 55mA
• Wiring: Uses NXV
OPERATING ENVIRONMENT
• Rated for Indoor Use Only
• Operating temperature: 32° to 104°F
(0° to 40°C)
• Relative humidity (non-condensing)
0% to 95%
WIRELESS
• Bluetooth® Version V5.2
• 2.4GHz: IEEE 804.15.1 based
SENSORS
• Detection Technology: Passive Infrared
and Ultrasonic
• 1:2.75 Coverage Paern (mounting
height: coverage radius)
• Coverage: 500 - 2,000 square feet
(152.4 - 609.6 square meters)
• Max Mounting Height 12 .
• LED Indicator (Red) indicates infrared
motion
• LED Indicator (Green) indicates
ultrasonic motion
PROGRAMMING INTERFACE
• NX Lighting Controls Mobile App
• NX Area Controller (NXAC) for
Network Applications
CERTIFICATIONS
WARRANTY
• 5-year limited warranty
• See HCS Standard Warranty for
additional information
DESCRIPTION
NOTE: The NXSMDT-OMNI is designed to be mounted on flat surface either for in-fixture or ceiling mount applications.
INSTALLATION FOR CEILING MOUNT DEPLOYMENT
1. Choose a mounting location on ceiling with a flat surface where the sensor face and sensor lens will be oriented in the downward
position as close to level as possible. NOTE: The sensor should be clear from obstructions to ensure proper detection and minimize
interference with the wireless radio.
- For hard ceilings: Mount to a junction box.
- For false ceilings: Aach the cover plate by either using machine screws and punching a small hole through the ceiling tile for the
NXCBL-P OR using the threaded mounting post then running the NXCBL-P through the center of the post.
(CONTINUED NEXT PAGE)
NXSMDTOMNI INSTALLATION
NXSMDTOMNI IS RATED FOR INDOOR USE ONLY
SPECIFICATIONS
93165408 Rev. B
• cULus Listed
• Complies with FCC Part 15.247
• FCC ID: YH9NXSMDT-OMNI
• IC: 9044A-NXSMDTOMNI