LED Lighted Medicine Cabinet Installation and Operating Manual
LED Lighted Medicine Cabinet INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN Please read these instructions carefully to familiarize yourself with the required tools, materials, and installation sequences. Follow the sections that pertain to your particular installation. This will help you avoid costly mistakes. In addition to proper installation, read all operating and safety instructions. All information in these instructions is based upon the latest product information available at the time of publication.
LED Lighted Medicine Cabinet TOOLS REQUIRED PARTS SUPPLIED Item (2) Screws for wall (4) Support Angle (6) Clips x 4PCS x 2PCE x 8PCS (1) Anchors (3) Mounting Bar (5) Glass panel (7) Screws for Support Angle x 6PCS x 1PCE x 2PCS x 2PCS
LED Lighted Medicine Cabinet DHJSMC1526SKSXLDX DHJSMC2026SKSXLDX DHJSMC2030SKSXLDX DHJSMC2030SKSXRDX DHJSMC2430SKSXLDX DHJSMC2430SKSXRDX 610.0(24") ExBrite reserves the right to change marked dimensions without prior notice.
LED Lighted Medicine Cabinet INSTALLATION for DHJSMC1526SKSXLDX and DHJSMC2026SKSXLDX Verify minimum clearances. Place the Mounting Bar on wall and make sure it is horizontal by level. 3" Suggest 75" to floor 3" STEP 2 STEP 1 Drill holes. Insert anchors where needed. Secure the mounting bar with screws. We provide plug along with cabinet. Optional to cut the plug directly and connect to electrical wiring if using a wall switch. STEP 3 We b s i t e : H t t p : / / w w w. e x b r i t e u s a .
LED Lighted Medicine Cabinet Lift the cabinet onto the mounting bar. Ensure the hooks engage the mounting bar. STEP 5 If the door is left open, it can be changed to right open by releasing the hinge and rotate the door, and vice versa. Place the support angle on the bottom of the cabinet. Mark hole location on wall. Drill hole. Insert anchor where needed. Fixed the support angle by screw. STEP 6 Install the clips. Insert the shelves between the clips.
LED Lighted Medicine Cabinet Turn on/off the light by waving your hand underneath the cabinet or control by wall swatch. Dimming by placing your hand under the sensor. WAVE HERE STAY HERE STEP 10 STEP 9 DOOR ADJUSTMENT (IF NEEDED) Adjust corresponding screws on the hinge to align the doors, ensure that gaps are even and the doors open and close smoothly.
LED Lighted Medicine Cabinet INSTALLATION for DHJSMC2030SKSXLDX and DHJSMC2030SKSXRDX DHJSMC2430SKSXLDX and DHJSMC2430SKSXRDX We separate left-open door and right-open door for these models, they are not interchangeable. Luminous area is on top of the cabinet. Make sure you are installing correct one. Verify minimum clearances. 3" 3" STEP 1 Place the Mounting Bar on wall and make sure it is horizontal by level. STEP 2 Drill holes. Insert anchors where needed. Secure the mounting bar with screws.
LED Lighted Medicine Cabinet We provide plug along with cabinet. Optional to cut the plug directly and connect to electrical wiring if using a wall switch. STEP 5 Place the support angle on the bottom of the cabinet. Mark hole location on wall. Drill hole. Insert anchor where needed. Fixed the support angle by screw. STEP 7 Lift the cabinet onto the mounting bar. Ensure the hooks engage the bar. STEP 6 Install the clips. Insert the shelves between the clips.
LED Lighted Medicine Cabinet Turn on/off the light by waving your hand underneath the cabinet or control by wall swatch. Dimming by placing your hand under the sensor. WAVE HERE STAY HERE STEP 10 STEP 9 DOOR ADJUSTMENT (IF NEEDED) Adjust corresponding screws on the hinge to align the doors, ensure that gaps are even and the doors open and close smoothly.
