User's Manual

 The first time any headset is being registered, only

the Register single option is available. After a

single registration has been completed, the

Note:

This occurs with the default, Audio Fidelity Automatic

setting, which can be used with either narrow-band or

wide-band headsets. If you are installing a new base

where either all narrow-band or all wide-band headsets

already exist, you can change the Audio Fidelity mode by

selecting Non-HD Audio or HD Audio in

section 4.3.2

of the Advanced Installer Setups.

 If you are registering more than one headset, press

the Register multi (multiple) button and continue

registering each headset, one at a time. When you

have finished, press the Back button to exit the

multiple registration mode.

 On the TO REGISTER HEADSETS display, follow the instructions in the box.

When each registration is successfully completed:

 The ID number assigned to this headset will be shown. ID numbers are assigned

sequentially as 0 thru 9, A, B, C, D and E.

 The power light on the headset will remain on steady green.

 When you have finished registering headsets, press the Back button to exit the

registration mode. You can continue pressing the Back button until you return to

the MAIN MENU or LANE STATUS display.

If you have any problems registering the headsets:

In the USA, call HME Technical Support at 1-800-848-4468.

Outside the USA, call your local HME representative for assistance.