User's Manual

31
4.4 Network Settings
If the base station is connected to a computer network for remote access, you must enter
the network data based on information from your IT support. To do this, select the Menu
button on the LANE STATUS display and then select More on the MAIN MENU.
Press the Network button on the ADVANCED MENU display, to open the NETWORK
SETTINGS display.
4.4.1 Basic Network Settings
On the NETWORK SETTINGS display, press the button for each setting you want to
change. A display will open, where you can make the desired changes.
The network settings are explained below. Press the respective button on the
NETWORK SETTINGS display for each setting you would like to view or change.
 DHCP – allows the base to automatically acquire its network settings from a DHCP
server installed on the local network.
To edit this setting, press the DHCP button to
highlight ✔(on) or −(off). If −(off) is highlighted,
the base will use static network settings that you
enter via the NETWORK SETTINGS and
ADVANCED NETWORK SETTINGS displays.
Note:
Some network settings changes will cause
the base to automatically reset.