User's Manual

49
Message Playback Settings
 Routing − To choose where the selected Reminder message will be heard, press
the Settings button on the EDIT REMINDER MESSAGE display, and then
press the Headsets button on the EDIT REMINDER SETTINGS display.
On the SELECT REMINDER HEADSETS display, use the ▲(up) or ▼(down)
buttons to select a headset number for which you would like to turn the selected
Reminder message on or off, and then press the Edit button.
To select/deselect the headset where the message will be heard, press the Select
headset button on the EDIT display to highlight ✔(on) or −(off). To select/
deselect all headsets, press the Apply to all headsets? button to highlight Yes or
No. Press the Back button to save this setting.
Note: After selecting ✔(on), to hear the message in the ceiling speaker or Line Out, be
sure their volume is set high enough for the message to be heard. To do this, return
to the MAIN MENU and select Volume adjust to make the necessary adjustments.
 Repeats − To have the Reminder message play repeatedly at selected intervals,
press the Repeat button on the EDIT REMINDER SETTINGS display. On the
REPEAT INTERVAL display, use the ◄ or ► button to move the highlight left or
right for hours, minutes or seconds (HH:MM:SS) in the Time field, and use the
+ and − buttons to change the number in the highlighted box. Setting the repeat
interval to all 0’s disables repeats. To save this setting, press the Back button.
For multiple-lane
operations,
see
Appendix,
Reminder Messages.
To have the selected Reminder message heard
or not heard in the ceiling speaker(s), press the
Hear in ceiling speaker button to highlight
✔(on) or −(off).
To have the selected Reminder message heard
or not heard in the line out(s), press the Hear
in Line Out button to highlight ✔(on) or −(off).