User's Manual

60
2. Ceiling Speaker Volume
To raise and lower the volume levels heard from the ceiling speaker, select
Ceiling speaker from the VOLUME MENU and then on the IN/OUTBOUND
VOLUME display, select which volume you would like to adjust and use the +
and − buttons. If a volume is set to 0, that function is effectively turned off and
no audio will be heard at all.
To save these settings, press the Back button.
3. Line In/Out
To raise or lower the volume level to or from any device connected to the base
station line output, select Line In or Line Out on the LINE IN/OUT VOLUME
display and then use the + and – buttons.
To save these settings, press the Back button.
4. Vehicle Tone in Headset
The VEHICLE TONE VOLUME setting only adjusts the level of alert tones heard
in the headsets.
To raise and lower the volume level of alert tones, use the + and – buttons.
To save these settings, press the Back button.