User's Manual

4.6 PC Navigation

If your EOS|HD was set up to operate on a network, all of the same settings that can

be made on the base station can also be made from your PC, using a web browser.

Refer to Section 4.4, Network Settings, to configure the base with the proper Network

settings according to information from your IT department.

The EOS|HD provides web pages to view and edit base station configuration settings.

To open the EOS|HD on your PC, enter its IP Address in the address bar on your

internet browser as shown below, and then press the Enter key on your keyboard.

Note: You can find the IP Address on the base

station Network Status display by using the

following button sequence:

LANE STATUS > More > More > More > More.

If you click your cursor on an Edit button, an edit bar will appear with setup choices.

If you make any setup changes, you must click on the Save button to save your changes.

If you do not want to save your changes, or do not make any changes, you can click on any

other menu topic, or click on the back arrow at the top-left corner of the browser screen.

Select any category

from the Main Menu

that you would like to

view or edit. Some

topics will cause a

Secondary Menu bar

to appear, from which

you can select a sub-

topic.