User's Manual

On the ENTER INSTALLER PASSWORD display ─

enter the first character of the 4-digit password in the

highlighted box in the Enter Password field by pressing

the + (up) button to enter alphabetic characters, or the −

(down) button to enter numbers. Press the ► button to

move the highlighted box to the next position to the right.

Repeat this procedure until all 4 digits of the password are

entered, and then press the Continue button to access

the INSTALLER SETUP display.

TO SET BASE STATION FOR SPANISH

OR FRENCH LANGUAGE OPERATION

If the base station is returned to its factory default settings, it will be set for English

language operation. To change the language to Spanish or French, make the

following selections on the base station display.

Press the buttons indicated by arrows in the order of the numbered displays.

Press the More button on the INSTALLER SETUP display, and then select Language

on the ADVANCED INSTALLER SETUP display. On the SELECT LANGUAGE

display, press the Select language button to highlight the desired language.

After selecting the language, press the Back button to save the setting. The base

station will automatically be reset to its previous operating mode.