User's Manual

30
Auto Hands-Free (AHF) Mode (Only Order Taker #1)
 Order Taker #1 only, with the power off, press and hold the volume-up ▲ and A1
button while you press and release the PWR button to turn the power on in the AHF
mode.
 As a customer approaches Order Point #1, you will hear an alert tone in your headset,
and you will be able to hear the customer at speaker post or menu board #1.
 Use the volume-up ▲ and down ▼ buttons to adjust the customer’s voice level in
your headset if necessary.
 Speak and listen to the customer without pressing any buttons.
 Touch and release the A1 or B button to end communication with the customer.
 Touch and release the A1 button to speak to the customer again.
 If a customer drives away from the speaker post or menu board, the Communicator
will stop transmitting.
Push-To-Talk (PTT) Mode (Either Order Taker)
Note: In Tandem operation, only Order Taker #1 can use the Auto Hands-Free Mode.
If a Communicator is turned off while in the AHF mode, it will automatically be reset
for its previous operating mode.
 With the Communicator power off, press and hold the volume-down ▼ and B
buttons while you press and release the PWR button to turn the power on in the
PTT mode. The Communicator will remember this setting.
 As a customer approaches Order Point #1, Order Taker #1 will hear an alert tone in
the headset, and will be able to hear the customer at speaker post or menu board #1.
 If a customer approaches Order Point #2 when there is already another customer at
Order Point #1, Order Taker #2 will hear an alert tone in the headset, and will be
able to hear the customer at speaker post or menu board #2.
 Use the volume-up ▲ and down ▼ buttons to adjust the customer’s voice level in
your headset if necessary.
 Touch and hold the A1 button to speak to a customer at Order Point #1, or A2 to
speak to a customer at Order Point #2.
 If a customer drives away from the speaker post or menu board, the Communicator
will stop transmitting.
6.6 Internal Communication
To communicate internally with other COMMUNICATOR
®
operators, press and hold
the B button while talking. Release when finished. In single-lane operations, up to
four Communicator operators can have conference-call type communication by all
pressing the B button. Everyone pressing the B button will hear each other without
interference.
In dual-lane operation, if your system was set up for “Split-B,” internal communication
will be heard only by Communicator operators in your lane. If your system was not
set up for Split-B operation, internal communication will be heard by all
Communicator operators in both lanes. In dual-lane operation, up to three
Communicator operators can have conference-call type communication by all pressing
the B button. Everyone pressing the B button will hear each other without
interference. If a car arrives in a lane while internal communication is taking place,
priority will be given to the respective A channel for customer communication, which
will reduce the number of internal communication channels available.