User's Manual

Front – (See A on Figure 2.)

 The top four power supply lights are on when the base station has AC power.

 “A” TALK light is on during channel-A transmission.

 “B” TALK light is on during channel-B transmission.

 VEHICLE PRESENT light is on when a vehicle is present in the drive-thru lane or

when the system is in vehicle-detect override.

 RECORD light is ON RED when the base station is ready to record a red message

for the message repeater, and BLINKING RED while a red message is being recorded.

It is ON GREEN when the base station is ready to record a green message for the

message repeater, and BLINKING GREEN while a green message is being recorded.

Bottom – (See B on Figure 2.)

 PUSH FOR RECORD MODE button must be pushed IN AND RELEASED ONCE to

prepare the base station to record a red message for the message repeater, or

pushed IN AND RELEASED TWICE to record a green message.

Behind Front Door – (See C on Figure 2.)

 GREEN MESSAGE CONTROL and RED MESSAGE CONTROL switches must be in

the ON position to use the message repeater, OFF when the message repeater is not

being used. Instructions are given inside the front door.

 SPEED TEAM switch must be in the ON position for speed-team operation, OFF for

normal drive-thru operation.

 VEHICLE DETECTOR switch must be in the OVERRIDE position to disable the

vehicle detector. To reset the vehicle detector, switch to OVERRIDE for 5 seconds,

then switch back to NORMAL for normal vehicle detection. If the switch is left in the

OVERRIDE position, the outside microphone will remain on.

 DIP switches at the top are used to control messages going to the outside speaker, grill

speaker or COMMUNICATOR

s. DIP switch settings are shown inside the front door.

 Nine level controls are used to set the following levels:

VAA LEVEL CONTROL adjusts the volume level at which one’s own voice is heard

in the headset while speaking into the microphone. Turn clockwise to lower the voice

level in the headset earpiece. Turn counterclockwise to raise the voice level.

VEH. PRES TONE VOL. adjusts the vehicle-present tone volume in the headset.

VEH. PRES. TONE VOL. GRILL adjusts the volume of the vehicle present tone

played through the grill speaker.

SPKR VOL. OUTSIDE adjusts the outside speaker volume.

MSG VOL. OUTSIDE adjusts the volume of the outgoing message-repeater message

to the customer at the speaker post or menu board.

INBOUND VOL GRILL adjusts the volume of the inbound audio from the outside

microphone played through the grill speaker.

A VOL. GRILL adjusts the volume of channel A communication, from

Communicator operators, played through the grill speaker.

B VOL. GRILL adjusts the volume of channel B communication, from

Communicator operators, played through the grill speaker.

MSG VOL. GRILL adjusts the volume of the recorded message played through the

grill speaker.