User's Guide
Table Of Contents
- 1 Important Safety instructions
- 2 Introduction to FreeSpeak Edge™
- 3 Installing FreeSpeak Edge
- 3.1 Installing the FreeSpeak Edge transceiver
- 3.2 Clear-Com cable recommendations
- 3.3 Daisy-chain transceivers
- 3.4 Installing and removing an E-IPA-HX card
- 3.5 Adding an E-IPA-HX card to the software
- 3.6 Configuring the E-IPA-HX card for FreeSpeak Edge
- 3.7 Beltpack roaming between E-IPA-HX cards
- 3.8 Connecting the FreeSpeak Edge transceivers to a matrix
- 3.9 Adding transceivers to the matrix
- 3.10 Beltpack roles
- 3.11 Registering the beltpack to a matrix
- 3.12 Connect the beltpacks
- 3.13 Radio Frequency (RF) channel selection and power settings
- 3.14 De-register beltpacks from a system
- 4 Site survey features
- 5 RF channel selection 5 GHz
- 5.1 Radio Frequency (RF) channel selection and power settings
- 5.2 Channel selection
- 5.3 Channel re-use
- 5.4 Using Dynamic Frequency Selection (DFS) channels
- 5.5 Radar scanning in DFS channels
- 5.6 Transceiver - excluded channels
- 5.7 Wireless Regulatory Region (WRR)
- 5.8 Change RF channels on the Edge transceiver
- 6 Operating the Edge beltpack
- 7 Operating the Edge transceiver
- 8 Upgrading FreeSpeak Edge
- 9 Specifications
- 10 Regulatory compliance
- 10.1 Part numbers and regulatory models
- 10.2 FCC notice
- 10.3 FCC/IC/EC RF exposure warning
- 10.4 Industry canada compliance statement
- 10.5 Korean notice
- 10.6 Japan notice
- 10.7 Australia compliance statement
- 10.8 New Zealand compliance statement
- 10.9 European Union (CE mark)
- 10.10 Waste Electrical and Electronic Equipment (WEEE)
- 10.11 General Battery Safety Instructions for Battery Models: BAT41, BAT50, BAT60, BAT70, BAT80
- 10.12 배터리 모델에 대한 일반 배터리 안전 지침 : BAT41, BAT50, BAT60, BAT70, BAT80
- 10.13 BAT41, BAT50, BAT60, BAT70, BAT80
FreeSpeak Edge | User Guide
9.3 FreeSpeak Edge battery charger and battery
Specification Value
Power Supply
Input voltage:100 to 240 Vac (50 to 60Hz)
Output voltage: 12 V at 5 A (60 W)
MTBF (min.) 300,000 hours (calculated hours
at 25 degrees Celsius, by Telcordia SR-332)
Temperature
Operating: 0 to 45 degrees Celsius
Storage: -30 to 70 degrees Celsius
Humidity: 20 to 90%, non-condensing
Charger dimensions
11 x 2.8 x 7.2 inches, 279.4 x 71.1 x 182.9
mm (whd)
Charger weight
Charger alone: 1.94 lb, 0.88 kg
Power supply and cord: 1.12 lb, 0.51 kg
Total:3.06 lb, 1.39 kg
Battery dimensions
2.3 x 3.3 x 0.7 inches (58.4 x 82.6 x 17.5
mm)
Battery weight 0.24 lb (0.11 kg)
Battery capacity 4400 mAh
Typical battery voltage 3.6 V
Battery power 16 Wh
9.4 Transceiver models (regional variations)
Part number Region
FS-EDGE-TCVR-50-IP-US United States
FS-EDGE-TCVR-50-IP-CN Canada
FS-EDGE-TCVR-50-IP-EU Europe
FS-EDGE-TCVR-50-IP-J Japan
FS-EDGE-TCVR-50-IP-AU Australia and New Zealand
FS-EDGE-TCVR-50-IP-SK South Korea
Page 84