User's Guide
Table Of Contents
- 1 Important Safety instructions
- 2 Introduction to FreeSpeak Edge™
- 3 Installing FreeSpeak Edge
- 3.1 Installing the FreeSpeak Edge transceiver
- 3.2 Clear-Com cable recommendations
- 3.3 Daisy-chain transceivers
- 3.4 Installing and removing an E-IPA-HX card
- 3.5 Adding an E-IPA-HX card to the software
- 3.6 Configuring the E-IPA-HX card for FreeSpeak Edge
- 3.7 Beltpack roaming between E-IPA-HX cards
- 3.8 Connecting the FreeSpeak Edge transceivers to a matrix
- 3.9 Adding transceivers to the matrix
- 3.10 Beltpack roles
- 3.11 Registering the beltpack to a matrix
- 3.12 Connect the beltpacks
- 3.13 Radio Frequency (RF) channel selection and power settings
- 3.14 De-register beltpacks from a system
- 4 Site survey features
- 5 RF channel selection 5 GHz
- 5.1 Radio Frequency (RF) channel selection and power settings
- 5.2 Channel selection
- 5.3 Channel re-use
- 5.4 Using Dynamic Frequency Selection (DFS) channels
- 5.5 Radar scanning in DFS channels
- 5.6 Transceiver - excluded channels
- 5.7 Wireless Regulatory Region (WRR)
- 5.8 Change RF channels on the Edge transceiver
- 6 Operating the Edge beltpack
- 7 Operating the Edge transceiver
- 8 Upgrading FreeSpeak Edge
- 9 Specifications
- 10 Regulatory compliance
- 10.1 Part numbers and regulatory models
- 10.2 FCC notice
- 10.3 FCC/IC/EC RF exposure warning
- 10.4 Industry canada compliance statement
- 10.5 Korean notice
- 10.6 Japan notice
- 10.7 Australia compliance statement
- 10.8 New Zealand compliance statement
- 10.9 European Union (CE mark)
- 10.10 Waste Electrical and Electronic Equipment (WEEE)
- 10.11 General Battery Safety Instructions for Battery Models: BAT41, BAT50, BAT60, BAT70, BAT80
- 10.12 배터리 모델에 대한 일반 배터리 안전 지침 : BAT41, BAT50, BAT60, BAT70, BAT80
- 10.13 BAT41, BAT50, BAT60, BAT70, BAT80
FreeSpeak Edge | User Guide
In the event the battery leaks and the fluid gets into one’s eye, do not rub the eye. Rinse
well with water and immediately seek medical care. If left untreated, the battery fluid could
cause damage to the eye.
If the device causes abnormal current to flow, it may cause the battery to become hot,
explode, or ignite causing serious injury.
10.11.3 Charger types
Your battery must only be charged with an HME/Clear-Com recommended charger ONLY.
Any attempt to use other types of chargers may cause an explosive reaction, fire or chemical
burns.
10.11.4 Battery charger models
BAT41 Charger Model: AC40 and AC40A
BAT50 Charger Model: AC50
BAT60 Charger Model: AC60
BAT70 Charger Model: AC70
BAT80 Charger Model: AC80
10.11.5 Charging the battery
Be sure to follow the warnings listed below while charging the battery. Failure to do so may
cause the battery to become hot, explode or ignite and cause serious injury.
l Do not continue charging the battery if it does not recharge as specified in the
HME/Clear-Com User Guide, under charging instructions.
l Do not attach the battery to an external charger, power supply plug or directly to a car’s
cigarette lighter.
10.11.6 Recycling the battery
If your business or household does not have a battery recycling program, go to the following
URL or copy and paste the following URL into your browser, then enter your zip code for a list
of recycling centers: http://earth911.com
10.12 배터리 모델에 대한 일반 배터리 안전 지침 : BAT41, BAT50,
BAT60, BAT70, BAT80
BAT80 배터 리는 다 음이 제 공하 는 제품 과 함께 사용 하도록 특별 히
설계 되었습 니다. HM Company, HME Company, Clear-Com LLC
안전 주의 사 항 배터 리의 안 전과 신뢰 성을 보 장하려면이 섹션 의 지침 을
Page 93