User's Guide
Table Of Contents
- 1 Introduction
- 2 Installing Arcadia Central Station
- 2.1 Front Panel Connectors, Controls and Indicators
- 2.2 Intercom Touchscreens
- 2.3 Rear Panel Connectors and Indicators
- 2.4 System Powering
- 2.5 Clear-Com Ethernet Cable Recommendations
- 2.6 Stage Announce and Program Feed
- 2.7 Set the Arcadia Central Station IP address
- 2.8 Save and Restore System Configuration
- 2.9 Reset to Default
- 2.10 Example Applications
- 3 Connecting to other systems
- 4 Network Setup
- 5 Core Configuration Manager (CCM) walkthrough
- 6 CCM configuration
- 6.1 Setting up the Arcadia Central Station
- 6.2 Adding IP Transceivers (FS Edge, FS II 1.9, 2.4)
- 6.3 Registering beltpacks
- 6.4 Viewing and adding Channels
- 6.5 Viewing and Adding Members to Groups
- 6.6 Channels or Groups?
- 6.7 Creating and Editing Roles
- 6.8 Set up GPIOs and Logic Events
- 6.9 Monitoring Your System from the CCM
- 7 Security
- 8 Configuring from the Front Panel
- 9 Spare parts
- 10 Terminology/glossary
- 11 Front Panel Menu Reference Tables
- 12 Specifications
- 13 Pinouts
- 14 Regulatory compliance
User Guide | Arcadia Central Station
3.
Scroll to the IP address type you wish to set (Management or AES67).
4.
Navigate to DHCP and select DISABLED (push to select menu item).
5.
A numerical touchscreen keypad appears in the screen.
6. Using the touchscreen, press Clr to clear the IP address field.
7. Enter the new IP address using the touchscreen.
8. Press OK.
9. Edit the subnet if required .
10. Press OK.
11. The Arcadia Central Station IP address has been changed.
2.7.2 Set the Arcadia Central Station IP address from the CCM
1.
In the CCM, navigate to Hardware > Resources.
2.
Click anywhere on the Arcadia Central Station panel under Hosts.
3.
In the Network tab, click Management (or AES67 or Dante, depending on which IP address
you wish to change).
4.
Select Static.
5.
Enter the required IP address and press the [Enter] key.
For information see: Arcadia Central Station LAN Configuration Rules on page 38
Page 15