User's Guide
Table Of Contents
- 1 Introduction
- 2 Installing Arcadia Central Station
- 2.1 Front Panel Connectors, Controls and Indicators
- 2.2 Intercom Touchscreens
- 2.3 Rear Panel Connectors and Indicators
- 2.4 System Powering
- 2.5 Clear-Com Ethernet Cable Recommendations
- 2.6 Stage Announce and Program Feed
- 2.7 Set the Arcadia Central Station IP address
- 2.8 Save and Restore System Configuration
- 2.9 Reset to Default
- 2.10 Example Applications
- 3 Connecting to other systems
- 4 Network Setup
- 5 Core Configuration Manager (CCM) walkthrough
- 6 CCM configuration
- 6.1 Setting up the Arcadia Central Station
- 6.2 Adding IP Transceivers (FS Edge, FS II 1.9, 2.4)
- 6.3 Registering beltpacks
- 6.4 Viewing and adding Channels
- 6.5 Viewing and Adding Members to Groups
- 6.6 Channels or Groups?
- 6.7 Creating and Editing Roles
- 6.8 Set up GPIOs and Logic Events
- 6.9 Monitoring Your System from the CCM
- 7 Security
- 8 Configuring from the Front Panel
- 9 Spare parts
- 10 Terminology/glossary
- 11 Front Panel Menu Reference Tables
- 12 Specifications
- 13 Pinouts
- 14 Regulatory compliance
User Guide | Arcadia Central Station
Status
A green tick mark indicates that all the ports that are configured for group are connected.
Otherwise, a warning triangle is shown.
Name
This field contains a label that enables you to identify the group.
Note: A label can contain up to 10 characters. You can edit this label from the center panel.
Online
This indicates how many of the total group members are online.
Talkers
This indicates how many FS II beltpacks or logic-routed ports have active talk routes on this
group.
6.5.2 Adding a new group
To add a new group:
1.
Click the new group icon . A new entry appears in the list of added groups.
Note: You can only add new groups up to a maximum number (100).
2. You can now add any required ports to the group.
6.5.3 Adding ports to a group
To add ports to a group:
Page 61