User's Guide
Table Of Contents
- 1 Introduction
- 2 Installing Arcadia Central Station
- 2.1 Front Panel Connectors, Controls and Indicators
- 2.2 Intercom Touchscreens
- 2.3 Rear Panel Connectors and Indicators
- 2.4 System Powering
- 2.5 Clear-Com Ethernet Cable Recommendations
- 2.6 Stage Announce and Program Feed
- 2.7 Set the Arcadia Central Station IP address
- 2.8 Save and Restore System Configuration
- 2.9 Reset to Default
- 2.10 Example Applications
- 3 Connecting to other systems
- 4 Network Setup
- 5 Core Configuration Manager (CCM) walkthrough
- 6 CCM configuration
- 6.1 Setting up the Arcadia Central Station
- 6.2 Adding IP Transceivers (FS Edge, FS II 1.9, 2.4)
- 6.3 Registering beltpacks
- 6.4 Viewing and adding Channels
- 6.5 Viewing and Adding Members to Groups
- 6.6 Channels or Groups?
- 6.7 Creating and Editing Roles
- 6.8 Set up GPIOs and Logic Events
- 6.9 Monitoring Your System from the CCM
- 7 Security
- 8 Configuring from the Front Panel
- 9 Spare parts
- 10 Terminology/glossary
- 11 Front Panel Menu Reference Tables
- 12 Specifications
- 13 Pinouts
- 14 Regulatory compliance
User Guide | Arcadia Central Station
l
Role Number
l
Alphabetical
l
Battery type: use this setting if the beltpacks are not using the supplied Li-ion
batteries.
l
Alkaline (default)
l
NiMh (for use in high pressure environments)
l
Software
l
Current version
l
Update software from a file on a USB (insert into USB C on front of Arcadia Central
Station)
l
License (you will not see this menu item on an Edge Base)
l
Connections - current connected ports on this Base
l
Licensed Ports
l
Reset
l
Reboot
l
Reset to Default. Reset here will reset role, channel and network details. You will
need to Add your transceivers back into the system after reset.
l
Reset CCM Password
l
Support Info
l
Settings
l
Save
l
Restore
l
CCM Access
l
Username
l
Default password
l
Hardware (view only)
l
Electronic main board serial number
Page 83