User's Guide
Table Of Contents
- 1 Introduction
- 2 Installing Arcadia Central Station
- 2.1 Front Panel Connectors, Controls and Indicators
- 2.2 Intercom Touchscreens
- 2.3 Rear Panel Connectors and Indicators
- 2.4 System Powering
- 2.5 Clear-Com Ethernet Cable Recommendations
- 2.6 Stage Announce and Program Feed
- 2.7 Set the Arcadia Central Station IP address
- 2.8 Save and Restore System Configuration
- 2.9 Reset to Default
- 2.10 Example Applications
- 3 Connecting to other systems
- 4 Network Setup
- 5 Core Configuration Manager (CCM) walkthrough
- 6 CCM configuration
- 6.1 Setting up the Arcadia Central Station
- 6.2 Adding IP Transceivers (FS Edge, FS II 1.9, 2.4)
- 6.3 Registering beltpacks
- 6.4 Viewing and adding Channels
- 6.5 Viewing and Adding Members to Groups
- 6.6 Channels or Groups?
- 6.7 Creating and Editing Roles
- 6.8 Set up GPIOs and Logic Events
- 6.9 Monitoring Your System from the CCM
- 7 Security
- 8 Configuring from the Front Panel
- 9 Spare parts
- 10 Terminology/glossary
- 11 Front Panel Menu Reference Tables
- 12 Specifications
- 13 Pinouts
- 14 Regulatory compliance
User Guide | Arcadia Central Station
8.2 Passwords, Addresses and Reset to default settings
8.2.1 Find the Arcadia Central Station IP address
1. Press the Menu button on the front of the Arcadia Central Station.
2. Navigate to Networking > Management > IP Address using the rotary controllers.
3.
You will see the device IP address.
8.2.2 Find the default password for the CCM
1. Press the Menu button on the front of the Arcadia Central Station.
2. Navigate to Administration > CCM Access > Default Password using the rotary
controllers.
3. You will see the default password in the right hand menu screen.
8.2.3 Reset the device to default settings
1. Press the Menu button on the front of the Arcadia Central Station.
2. Navigate to Administration > Reset > Reset To Default > Reset Base.
3. The Arcadia Central Station will reset to factory settings.
Page 84